KLINGERSIL® C-4408 KLINGERSIL® C-4408 is suitable for high stress due to wire reinforcement. It is a universal high-pressure gasket for the use in a wide range of industrial applications. Aramid fibres bonded with NBR. Resistant to oils, water, steam, gases, fuels, alcohols, hydrocarbons, lubricants and refrigerants. »» Wire reinforcement »» Improved stress relaxation »» Suitable for higher pressures »» Higher resistance against blow-outs »» More safety at high internal pressures »» German Lloyd referring to KLINGERSIL® product range SUPERIOR EXCELLENT VERY GOOD GOOD MODERATE MECHANICAL RESISTANCE THERMAL RESISTANCE CHEMICAL RESISTANCE PULP & PAPER FOOD & BEVERAGES

KLINGERtrusted, worldwide. Typical technical data for thickness 2.0 mm: Compressibility ASTM F 36 J Sizes: 1000 x 1500 mm, 2000 x 1500 mm Thicknesses: 0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm Tolerances: Thickness acc. DIN 28091-1 Length ± 50 mm, width ± 50 mm Other thicknesses, sizesand tolerances on request. © In area one, the gasket material is normally suitable subject to chemical compatibility. In area two, 90he gasket material may be suitable but a technic 70evaluation is recommended. In area three, do not inst all the gasket without a technical evaluation. Always refer to the chemical resistance...