Catalogs >
KLINGER >
KLINGERSIL® C-4400

KLINGERSIL® C-4400
2Pages

Catalog excerpts

KLINGERSIL® C-4400 KLINGERSIL® C-4400 is a universal material for safe and reliable sealing. It consists of a unique matrix, which offers an excellent combination of different properties. Aramid fibres bonded with NBR. Resistant to oils, water, steam, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants. »» Universal high pressure gasket material »» Dimensionally stable »» Consistent material composition »» Excellent price/performance ratio »» Suitable for many different media »» Very good resistance to refrigerants »» BAM-tested »» DIN-DVGW »» DIN-DVGW W 270 »» DVGW VP 401 »» Elastomer-Guideline »» ÖVGW Reg.No. G 1.912 »» German Lloyd »» TA-Luft (Clean air) »» Fire-Safe acc. DIN EN ISO 10497 referring to KLINGERSIL® product range SUPERIOR EXCELLENT VERY GOOD GOOD MODERATE MECHANICAL RESISTANCE THERMAL RESISTANCE CHEMICAL RESISTANCE PULP & PAPER FOOD & BEVER

Open the catalog to page 1

KLINGERtrusted, worldwide. Typical technical data for thickness 2.0 mm: Compressibility ASTM F 36 J Sizes: Tolerances: Length ± 50 mm, width ± 50 mm Thicknesses: 0 5 mm 1 0 mm 1 5 mm 2 0 mm 3 0 mm Other thicknesses, sizes and tolerances on request. (7 In area one, the gasket material is normally suitable subject to chemical compatibility. In area two, the gasket material may be suitable but a technical evaluation is recommended. In area three, do not install the gasket without a technical evaluation. Always refer to the chemical resistance of the gasket to the media. Certified acc. to DIN...

Open the catalog to page 2