KLINGER Klinger KLINGERtop-flon multi High-tech premium PTFE sealing tape KLINGER®top-flon multi. This PTFE sealing tape, with its multidirectional fibre structure, offers exceptional stability for applications in steel and glass-lined flanges at temperatures of between -240°C and +270°C. KLINGER - The global leader in static sealing

KLINGER The further development of production technologies for PTFE materials has allowed KLINGER to offer you a PTFE sealing tape with really special properties. Special stages in the process means that the fibre structure generated within the KLINGER®top-flon multi sealing tape is longitudinal and lateral at the same time, which gives remarkable strength in both directions. This gives both excellent stability in terms of width -despite the high press resistance scores, the widening of the sealing tape under stress is virtually negligible - and the high levels of cold flow appearing usually with...

KLINGER®top-flon multi High-tech premium PTFE sealing tape Application field PTFE is known for its particular chemical resistance. KLINGER®top-flon multi is a virginal PTFE and therefore resistant to all media except fluorine in element form, other aggressive fluorine compounds and molten alkaline metals. Can be used in pH range of 0 to 14. The temperature resistance of the material ranges from -240°C to +270°C, up to 315°C in the short term. Because of the possible different loads and sealing forces under real conditions, the practical limits in terms of pressure and temperature can vary. Please...

Seal selection and Installation Seal selection On a general basis, we can only put forward recommendations, as the conditions of use vary enormously. For steel flanges, we recommend a seal width of 33 % to 50 % of the seal surface. If the seal is for a flange which is sensitive to tension (glass or ceramic flange) then the seal width should be equal to the maximum seal surface area in order to distribute possible tension as evenly as possible. For glass-lined flanges the gasket should excess the outer diameter by minimum 3 mm to ensure form-fitting. Function and service life 1. Prior to fitting...