Catalogs >
KLINGER >
KLINGER®Ringschneidemaschine

KLINGER®Ringschneidemaschine
4Pages

Catalog excerpts

KLINGER Circular Slitting Saw Equipment With a Klinger circular slitting saw you are equipped for any emergency. You can manufacture rings, collars, hoops and bands from 80 mm to 1250 mm diameter in all gauges – at the turn of a hand. KLINGER – The global leader in static sealin

Open the catalog to page 1

Making the equipment operational First adjust the centring bolt to the size of the required circular slitter. For this purpose, employ the incorporated tape line, by attaching it to the centring bolt. The set radius can be read off the slitter position. Insert the slitter substrate on the centring bolt and set the slitting depth on the small hand wheel © so that the slitter just cuts into the substrate but does not touch the counter roller in the rail. This setting should then to be secured with the counter nut. Thereafter, turn the slitter height back to the initial position. Slitting...

Open the catalog to page 2

Our ”tiny one” for rapid servicing work on customer workshops The ”tiny one” is ideal for mobile workshops. It is easy to transport, quick to install and simple to handle and comes equipped with slitting work face, centering bolt, slitter and slitter callipers. The equipment can be employed to process all work from 300 mm outside diameters to 25 mm inner diameters.

Open the catalog to page 3

The slitting substrate supplied is of 3 mm gauge and has a diameter of 400 mm. Diameters available are 400 mm, 700 mm and 1270 mm. New: Circular slitters of specially hardened steel Technical specifications at a glance Dimensions and weights Length max. 1,100 mm Working application Min. circular feature diameter, dependent on gauge approx. 80 mm Max. circular feature diameter 1,250 mm Circular feature width, dependent on type of workpiece up to 1 mm Circular feature width max. 160 mm Slitting depth, dependent on type of workpiece up to 9 mm For your choice of the...

Open the catalog to page 4