axial fans WW-302-KL fan is meant for general ventilation of production halls, workshops, shops and storehouses. They are installed directly in the wall openings and windows. The fan consists of a square steel sheet housing, with centrally located motor. The impeller is directly installed at the motor shaft. The fan inlet is shielded with a wire mesh. The back of the fan is made of a self-swinging shutter. Standard equipment of the fan is the swinging guard, protecting the fan from atmospheric factors, wind and directing the air outlet stream downwards. The fan is equipped with a pull rope ON/OFF switch. The appliance can work in vertical position only. Technical data Type 1. Maximum temperature of the forwarded air is +60°C. Maximum temperature within the work area +40°C. 2. The fans can be applied for conveying the dry air of maximum dustiness 0,3 g/m3.