Transition heating sleeve for various fittings and adapters Application and Properties Transition heating sleeve – to avoid cold spots at joints. Controled-Version Additional voltage supply is necessary. With sensor, a control unit is necessary + Adjustable temperature range (max. 200 °C) + Sensor-Type arbitrary + Flexible to use + Can be used for any fittings or components + Standardized sizes + Fast delivery times + Easy assembly + Very good thermal insulation + Excellent chemical resistance + Temperature resistance 0 to +200 °C + Operating Temperature up to +200 °C (care must be taken to ensure a tight fit) Integrated-Version Heating element is connected in a serial connection into the heating circuit of the heated hose. + No external control unit is necessary + No additional costs for regulation Suitable only for one specific heated hose. The sleeve can only be operated in conjunction with this specific heated hose. Insulated-Version Without additional heating element + Reduces temperature losses - No additional heat input Application example, Controled-Version (heated) Technical Data Outer-/Innerjacket: PTFE coated Glass fibre Fastening: Velcro Insulation: glass needle mat Degree of protection: IP54 *Only for a voltage of 230 VAC, further voltage rages up on request possible **Only possible for insulated version Status:07-2