DATA SHEET HEATING HOSES FOR THE AUTOMATION TECHNOLOGY KR for robot systems This heating hose was specially developed for use on industrial robots. Due to the strong dynamic load caused by the use of the robot, the hose is equipped with a special and particularly strong, waterproof outer jacket, as well as a special protective element for the internal temperature sensor, in addition to other special measures. For KLETTI's heating hoses, a high-quality PTFE or PFA (only up to 100°C) inner hose is usually used. These inner pressure hoses, with different wire coverings, are used for special applications where high demands are made on the pressure load capacity of the heating hoses.

DATA SHEET HEATING HOSES FOR THE AUTOMATION TECHNOLOGY KR for robot systems TECNICAL DATA Operating temperature Nominal voltage Nominal width Pressure hose PTFE core with protective braiding (see data sheet "Pressure hose") PFA core with protective braiding (up to 100°C) (see data sheet "Pressure hose") Others on request Connection fittings Test voltage High voltage test up to 2000 VAC Heating element Manufactured in accordance with the DIN standard, insulated with PFA or PTFE depending on the version and covered with nickel-plated protective braid, moisture-proof (only up to 250 °C) Temperature...