Mass Notification Warning Solutions Product Specifications www.klaxonsignals.com [email protected] Signalling Solutions

Accoustic mapping plots Klaxon Signals now a part of the Texecom organization have been supplying an extensive range of signalling products and warning systems to the world for over 50 years. Our wealth of experience in the field of signalling stems from vast knowledge gained by providing notification solutions for a broad spectrum of clients and industries. Klaxon’s mass notification warning systems provide a full product and service combination incorporating as required pre/post project evaluation, acoustic surveying, personnel training and maintenance for a tailor made solution to meet customer...

Electronic Siren Systems Klaxon Signals provides a range of warning sirens for operation in Electronic siren systems consist of; various environments. The range includes both, conventional motor An array of siren horns manufactured from cast aluminium driven sirens and the more sophisticated and flexible electronic siren mounted on a mast. The horns can be mounted in an omni or systems for non-hazardous and hazardous environment operation. uni directional configuration depending on the shape of the sound coverage required. Motor Driven Sirens A controller which provides monitoring and control....

Product Range Overview Motor Driven Sirens Range Product Identification Installed Location Classification Wide area omni-directional coverage Wide area omni-directional coverage * Note: GP sirens are available with anti-icing heaters and thermostat Value Electronic Sirens Product Identification Installed Location Classification Loudspeaker Configuration / Coverage Wide area uni-directional coverage Wide area uni or omni-directional coverage Product Identification Installed Location Classification Loudspeaker Configuration / Coverage Wide area uni-directional coverage Wide area uni or omni-directional...

■ Product Range Overview Page 4 Motor Driven Sirens Page 6 ■ Control Panels/Sound Coverage Page 9 Electronic Sirens Page 10 ■ Value Range Page 10 Radio Control Equipment Page 12 Value Range Control Options Page 13 ■ Superior Range Page 14 Radio Control Equipment Page 18 Cellular GSM Alert System Page 19 ■ Portable Range Page 20 Superior portable Range Page 20 ■ ES Siren ATEX Approved Page 22 Sound Coverage Plot Page 23 Control Options Page 24 Control Topology Page 25 Siren Selection Criteria

Motor Driven Sirens

GP Range The GP range of conventional motor powered sirens provides a basic solution to address wide area mass alert signalling for all industrial, civil, commercial and environmental requirements. The products are of simple rugged construction and provide a low frequency traditional air raid siren sound. Audibility range between 135db @ 1 metre, (105db @ 30metres) for the smallest unit to 145db @ 1 metre, (115db @ 30metres for the largest unit. Sirens in this range in increasing order of sound output are the GP6, GP10 & GP12 units. 4 75Hz constant tone signal for the GP6 & GP10 sirens and a...

Motor Driven Sirens FP Range The FP range of conventional motor powered sirens provides a basic solution to address wide area mass alert signalling in hazardous area locations for all industrial, civil, commercial and environmental requirements. The products are of simple rugged construction and provide a low frequency traditional air raid sound. Audibility range between 135db @ 1 metre, (105db @ 30metres) for the smallest unit to 140db @ 1 metre, (110db @ 30metres for the largest unit. Sirens in this range in increasing order of sound output are the FP6 & FP10 units. 475Hz constant tone signal....

GP & FP Siren Control Panels Sound Coverage Plots Control panels are available for use in controlling GP & FP sirens to enable The plots below show the anticipated coverage the sirens to which they are attached to produce two warning signals. distance in clear still air on level terrain with no A constant tone signal and a wail/undulating tone signal. obstructions, using a 10db reduction in sound pressure level per doubling of distance. mild steel with a lockable door isolator switch. Integral switches mounted on the door of the enclosure to activate and deactivate the attached siren. Remote...

Electronic Sirens – Value Range ES Siren The ES siren value range provides a robust economic solution to address wide area mass alert signalling for all industrial, civil, commercial and environmental requirement users who previously found conventional motor driven sirens acceptable for their needs but would like the advantages of battery operation and no 400Vac cabling. The products are of modular construction which allows the sirens to be scaled and tailored to the user’s specific needs in terms of signalling and omni or uni – directional sound coverage. Audibility range between 106db @ 30metres...

Electronic Sirens – Value Range – HMI Interfaces The basic switch & indicator HMI unit provides a means of siren The DT-11 HMI unit provides a means of siren activation and control and basic supervision for a single or multiple value range live voice input for a single or multiple value range siren siren system. system via its RS485 communication interface. Activation of up to 4 alarm signals. Test result displayed on a single indicator beacon which has Activation for up to 4 alarm signals or live PA via its keypad and integral 2 line 16 character LCD backlit module. been connected to the siren...

Electronic Sirens – Value Range – Radio Control R adio and Control Equipment Siren radio communication equipment: Desk microphone. M otorola GM340 Databox. Transceiver. Operating frequencies VHF 136-174 MHz, or UHF 403-470 MHz. Cables and installation accessories. Base station communication equipment: ■ S implex transceiver for voice and DATA computer connection. R J45 input for Motorola desktop Microphone (HMN-3000B) for live voice announcements. E xternal battery connection for continues operation when AC failure. I ntegrated power supply 120W - 110/230VAC for continues operating and charging...