Sensor & Technologies Inductive Proximity Sensor AFO-77 with auxiliary ZFN devices AFO Proximity Sensors (0 ... +200 °C) Inductive AFO Proximity Sensors are tough, insensitive and resistant to temperatures of up to +200 °C. Further advantages are the small size and the non-contact operation free from any wear and tear. They allow high reliability when used with high temperatures and the setting of the switching distance when connected to an evaluation device. Proximity Sensors are resistant to oil and water and are working non-reactive however small the parts to be detected are. Next to ferrous materials, AFO Proximity Sensors detect also a lot of other metals. They can be mounted flush in metals, and short response times guarantee that they are working reliably however fast the movements are. Design; length Material of the sensing face Maximum switching distance Mounting instructions Operating alternating voltage Ambiant temperature range Connection Specific lead capacity Maximum lead length Sensor evaluation device Length of sensor lead Protection rating flush mounting single-core, shielded Teflon lead AFO-77Ref. no. 12.04-99 MISxl _KeranCeramic scheibw Klaschka Sensor & Motion Technologies GmbH • Am Zeller Pfad 1 • D-75242 Neuhausen • Fon +49 7234 79 0 • [email protected] • www.klaschka.de

Inductive Proximity Sensor AFO-77 Ref. no. 12.04-99 Sensor & Technologies Connection NaherungsfDhle* Proximity Sensor Proximity Sensor The indicated switching distance refers to iron. When using Example for installation AFO Proximity Sensors for non-ferrous metals, a reduction factor has to be taken into account. Response range To set the indicated switching distance in the evaluation device with the potentiometer for switching distance setting, you have to put a piece of insulation paper (e.g. hard paper) as thick as the switching distance on the sensor and cover it with a metal lug. By turning...

Sensor & Technologies Auxiliary ZFN devices for Inductive Proximity Sensor AFO-77 Purpose When used with an AFO Proximity Sensor, these ZFN devices are working like three-pole inductive proximity switches for DC for a temperature range between 0 and +200 °C. As Proximity Switch when the Sensor is used in cramped spaces or harsh environments. The connected AFO forms the inductive part of the oscillator circuit located on the input side of the ZFN. The switching elements connected to the oscillator correspond to a standard sensor with DC 3-pole, the output of which is the make-contact (NO) when...

Sensor & Technologies Connection L+ A L-(24 VDC | single-unit device double-unit device We are certified according to DIN EN ISO 9001 Subject to technical changes! Klaschka Sensor & Motion Technologies GmbH • Am Zeller Pfad 1 • D-75242 Neuhausen • Fon +49 7234 79 0 • [email protected] • www.klaschka.de