Klaschka_Double Sheet Metal Detector BDK-ET (6 pages)
6Pages

Sheet Metal Thickness and Double Sheet Detection Series Double Sheet Metal Monitor BDK 2 Bleche BA : Taste für Betriebsartwechsel : Taste für Eingabe-Bestätigung bzw. Fehlerquittierung +,- : Taste zur Änderung der blinkenden Werte BA : Tastenkombination für SETUP-Programm  Robust unit for reliable double sheet detection in destacking and loading facilities for sheet metal processing works (especially presses and press lines).  Single surface contact measurement with DSP sheet metal thickness sensor up to 5.5 mm for Fe.  Single surface contact measurement with BDWF sheet metal thickness sensor up to 5.5 mm for non-ferrous (NE).  Single surface contact measurement with DSPW combination thickness sensor. up to 3.5 mm for Fe. up to 4.0 mm for non-ferrous (NE).  Operation of 1 sensor directly at the device, and up to 4 sensors via a switch.  256 program memories for different material types and thicknesses with the associated sheet metal thickness sensors in the standard operating mode.  Indication of sheet thickness and program parameters.  Standard version with electrically isolated parallel interface to system controller.  Field bus version with interface to PROFIBUS DP. Application Double Sheet Monitors check the automatic destacking and separation of ferrous and non-ferrous workpieces at sheet metal processing works (e.g. presses) with automatic feeding systems such as destackers, robots, feeders, etc. They reliably detect the situations when two or more sheets stick together, and allow thus to stop the process before resulting in damage to machinery or tooling. The BDK Double Sheet Monitor is suitable for operation with various sheet metal thickness sensors for monitoring ferrous (Fe) and non-ferrous (NE) sheet metals. Depending on the sensor and/or measurement method a thickness up to max. 5.5 mm can be detected. Configuration A cover held by a standard rotary lock protects the evaluation device. Sensor and evaluation device are characterised by a sturdy construction and a high protection class. The readymade connecting leads, with plugs and sockets on both sensor and device ends, permit quick and easy mounting and commissioning of the entire system. Four operator keys and a four-line illuminated LC text display permit the convenient entry of device and measuring parameters. There are 256 program memory locations, which permit the storage of the measuring programs. They permit quick changes of material or tool during operation, and the programs remain stored even when the device is switched off. © Klaschka Industrieelektronik GmbH • 75242 Neuhausen / Germany • Fon +49 7234 79 0 • Fax +49 7234 79 112 • e-mail: sale

Sheet Metal Thickness and Double Sheet Detection Series Double Sheet Metal Monitor BDK Technical Data The double sheet metal monitoring and the measurement of the sheet metal thickness by means of the evaluation device BDK-ET-1.3 takes place by way of single surface contact measurement methods. The selection between ferrous sheet measurement using the magnetic flux method and the non-ferrous sheet measurement based on the eddy current principle takes place automatically when selecting the sensor type. This procedure requires that the sensor rests on the sheet metal during the measurement....

Sheet Metal Thickness and Double Sheet Detection Series Double Sheet Metal Monitor BDK DSP Thickness Sensor for ferrous (Fe) sheets Type Exciter coil - Nominal voltage - Power consumption Integral proximity switch - Switching distance Housing material Protection rating Ambient temperature approx. 1.2 mm nickel-plated steel IP 65 0 ... 60 °C *) The measuring range for non-ferrous (NE) sheets can be ex- Versions: Type tended to 4 mm or rather 5 mm by use of a special adapter for the sensor installation, which can be supplied separately on demand. When using an unsuitable adapter, the accuracy...

Sheet Metal Thickness and Double Sheet Detection Series Double Sheet Metal Monitor BDK BDIW-1.4 Sheet Thickness Sensor Switch Versions with connecting lead straight or angled – also available with open ends. Connection of up to 4 sensors to the BDK connector. Evaluation Device BDK Sensor connection XS1 Sheet Sheet metal thickness sensor for non-ferromagnetc sheets BDWF-m54rg-2s 13.05-73 ADD1/2-1.3 T-Coupler Connection of 2 different sensor types to the BDK connector. © Klaschka Industrieelektronik GmbH • 75242 Neuhausen / Germany • Fon +49 7234 79 0 • Fax +49 7234 79 112 • e-mail:...

Sheet Metal Thickness and Double Sheet Detection Series Double Sheet Metal Monitor BDK Sensor bracket with suction cup for mounting Sheet Thickness Sensor For single surface contact monitoring (e.g. for destacking equipment), sheet thickness sensors are often built into the suction cup of the gripper. For the DSP, DSPW, and BDWF thickness sensors with (M42, M54) design there are different versions of sensor brackets available. 2. For Sensors with M42 x 1.5 and M54 x 0.75 thread 1. For Sensors with M42 x 1.5 and M54 x 0.75 thread - spring-mounted, with a flexible spherical bearing Spare...

Sheet Metal Thickness and Double Sheet Detection Series Double Sheet Metal Monitor BDK Order Data (designation / ref.no) ADD1/2-1.3 T-Coupler for connecting additional sensors, 1 x pin, 2 x socket Evaluation Devices BDK-ET-1.3, relay outputs BDK-ET/OB-1.3, semi-conductor relay outputs BDK-ET/FP-1.3, PROFIBUS DP Sheet Metal Thickness Sensors for single-surface contact measurement DSPW-42sg-1s 13.05-66 for Fe sheets up to 3.0 mm / for non-ferrous (NE) sheets up to 2.0 mm Thread M42 x 1.5 - For using the DSPW-42sg-1s sensor, the evaluation device has to be equipped with software version E118...