Sheet Metal Thickness / Double Sheet Detection BDK-1.3, BDK/FS-, …/FP-, …/PN-, …/OB-1.3 Series Universal Double Sheet Metal Monitor Ref. no. 20.05-80, …-81, …-82, …-93, 20.21-01  Robust unit for reliable double sheet detection in destacking and loading facilities for sheet metal processing works (especially presses and press lines)  Single surface contact thickness sensor up to 5.5 mm for Fe  Single surface contact measurement with thickness sensor up to 5.5 mm for non-ferrous (NE)  Single surface contact measurement with combination thickness sensor up to 3.5 mm for Fe up to 4.0 mm for non-ferrous (NE)  Single surface non-contact measurement with DSD thickness sensor on reference basis up to 6,5 mm for Fe  Double surface non-contact measurement thickness sensors BDWD/S and BDWD/E up to 3.0 mm for Fe up to 6 mm for non-ferrous (NE)  Operation of 2 sensors on one device, several sensors can be operated via T-coupler or sensor switch  256 program memories for different materials and thicknesses with the associated sheet metal thickness sensors in the standard operation mode  Indication of sheet thickness and program parameter  Standard version with electrically isolated parallel interface to system controller Application Double Sheet Metal Monitors check the automatic destacking and separation of ferrous (Fe) and non-ferrous (NE) workpieces at sheet metal processing works (e.g. presses) with automatic feeding systems such as destackers, robots, feeders, etc. They reliably detect the situations when two or more sheets stick together, and allow thus to stop the process before resulting in damage to machinery or tooling. The BDK Double Sheet Metal Monitor is suitable for operation with various sheet metal thickness sensors for monitoring ferrous and non-ferrous sheet metals. Depending on the sensor and/or measuring method, a thickness up to max. 6,5 mm can be detected. Configuration A lockable cover protects the evaluation device against unauthorised access. Sensor and evaluation device are characterised by a sturdy construction and a high protection class. The ready-made connecting leads, with plugs and sockets on both sensor and device ends, permit quick and easy mounting and commissioning of these devices. Four operator keys and a four-line illuminated text display permit the convenient entry of device and measuring parameters. There are 256 program memory locations, which permit the storage of the measuring programs. They allow quick changes of material or tool during operation, and the programs remain stored even when the device is switched off. A laptop and the PROPAR/BDK-1 software allow the downand uploading of all program parameters using the RS232 interface on the front panel of the device.  Field bus version with interface to different standard field buses  Serial interface for the down- and uploading of the program parameters Klaschka Sensor & Motion Technologies GmbH • Am Zeller Pfad 1 • D-75242 Neuhausen • Fon +49 7234 79

BDK-1.3, BDK/FS-, .../FP-, .../PN-, .../OB-1.3 Sheet Metal Thickness / Double Sheet Detection Ref. no. 20.05-80, ...-81, ...-82, ...-93, 20.21-01 Series Universal Double Sheet Metal Monitor Mode of Operation There are various measurement methods for double sheet monitoring and measuring the sheet metal thickness with the BDK 1.3 evaluation device. Measuring methods can be subdivided into two groups: contact and non-contact. The selection between ferrous sheet measurement using the magnetic flux method and the non-ferrous sheet measurement based on the eddy current principle takes place automatically...

BDWF thickness sensor for NE sheets (single surface contact measurement) *) Possibility to extend the measurement and sheet thick ness range with software version F119 or higher (August 2015). Field coil - Nominal voltage - Power consumption Integral proximity switch - Switching distance Housing material Protection rating Ambient temperature approx. 1.2 mm nickel-plated steel IP 65 0 ... 60 °C Power supply Housing material Protection rating Ambient temperature **) DSD-30mg74n3/6,5-1Sd1 possible with software version F120 (April 2022). DSPW thickness sensor for Fe and NE sheets (single surface...

BDK-1.3, BDK/FS-, …/FP-, …/PN-, …/OB-1.3 Sheet Metal Thickness / Double Sheet Detection Ref. no. 20.05-80, ...-81, ...-82, ...-93, 20.21-01 Series Universal Double Sheet Metal Monitor Sheet metal Single surface contact measurement with sheet metal thickness sensors DSP, BDWF or DSPW (combination sensor) in suction cup gripper. Suction cup grabber gripper Sheet metal Work piece Forbidden zones for work pieces during measurement Double surface non-contact measurement with sheet metal thickness sensor pair BDWD/S and BDWD/E. Sheet metal Fixed spacing Conveyor belt Conveyor belt Thickness measurement...

Sheet Metal Thickness / Double Sheet Detection BDK-1.3, BDK/FS-, …/FP-, …/PN-, …/OB-1.3 Series Universal Double Sheet Metal Monitor Ref. no 20.05-80, ...-81, ...-82, ...-93, 20.21-01 Accessories BDK Evaluation Device Sensor connection XS1 or XS2 BDK-1.3 Double Sheet Metal Monitor Sheet Metal Sheet metal thickness sensor for single surface non-contact measurement Type DSD-18, DSD-30 Sheet Metal Thickness Sensor BDWF, DSP or DSPW Sheet Metal Sheet metal thickness sensor for non-ferromagnetic sheets BDWF-m54rg-2s 13.05-73 Plug-in versions with sensor connection straight or angled available also...

For single-surface contact monitoring (e.g. for destacking equipment), sheet thickness sensors are often built into the suction cup of the gripper. For the DSP, DSPW, and BDWF thickness sensors with (M42, M54) design there are different versions of sensor brackets available. with suction ring, with flexible spherical bearing - spring-mounted, with bellows Spare Parts for Sensor Brackets Spare Parts for Sensor Brackets Klaschka Sensor & Motion Technologies GmbH • Am Zeller Pfad 1 • D-75242 Neuhausen • Fon +49 7234 79 0 • [email protected] • www.klaschka.de