PA-S45 W / 70 W
4Pages

{{requestButtons}}

Catalog excerpts

PA-S45 W / 70 W - 1

Plasma Cutting from 3 to 70 mm Cutting and Plasma Gouging with Hand or Machine Torch www.kjellberg.de

Open the catalog to page 1
PA-S45 W / 70 W - 2

Simple and inexpensive Technology for every Cutting Range The plasma cutting systems of the PA-S series are suitable for manual and mechanised cutting of material thicknesses in the range from 3 to 70 mm. The use of a range of different plasma gases and gas mixtures allows the clean cutting and gouging of electrically conductive materials. As portable systems, they can be used in workshops, training centres and on construction sites. The systems in the PA-S series can handle contour cuts, straight cuts and bevel cuts up to 60°. Application Areas Advantages • Metal construction and...

Open the catalog to page 2
PA-S45 W / 70 W - 3

Greater Versatility with optional Equipment Liquid-cooled Plasma Torch Accessories • Nozzles, spacers and caps for template cutting • Nozzles and ceramic caps for plasma gouging • Wheel guide for cutting with scribers • Bevelling cap and bevel cutting attachment with selectable angle setting for bevel cutting for weld seam preparation or for trimming An essential requirement for the quality of cut surfaces is the proven design of the torch's cathode and nozzle. The liquid cooling of the plasma fine-jet torch guarantees longer consumable life. Plasma cutting with the systems in the PA-S...

Open the catalog to page 3
PA-S45 W / 70 W - 4

Technical Data Power source Fuse, slow Connected load, max. Cutting current Other voltages and frequencies on request. Plasma torch Cutting current 100 % d. c. Cutting range Plasma gas Swirl gas Torch cooling Operating Data (extract) (2) PA-S45 W Material thickness (mm) Mild steel Cutting current (A) Cutting speed (mm/min) Stainless steel Cutting current (A) Cutting speed (mm/min) Aluminium Cutting current (A) Cutting speed (mm/min) Mild steel Cutting current (A) Cutting speed Stainless steel Cutting speed (mm/min) Aluminium Cutting current (A) Cutting speed (mm/min) Listed cutting speeds...

Open the catalog to page 4

All Kjellberg Finsterwalde catalogs and technical brochures

  1. CutFire 100i

    2 Pages

  2. Q-SERIES

    4 Pages

  3. FineFocus

    4 Pages