Scroll Chuck with Integrated Jaw(straight Recess) Durable, reliable end versatile KITAGAWA'S stendard type •Straight Recess •Single Piece Jaw Type Available with hard jaw for internal and external gripping. •Steel body Body is manufactured from high quality steel to increase rigidity, durability and rotational speed. ( SC-3, 4, 5, 14, 16 are made of cast iron, SSSC type and JN type, each one set of internal iaws and external jaws are attached as standard. Soft jaws cannot be used for JN type. SC-F type, each one set of internal jaws, external jaws and soft jaws are attached as standard. SKWhen the soft jaws are used for SC-F type, use the chuck of lower specification. sssSince there are types mounted to the front side, please contact your agent if required.

Scroll Chuck With 2 piece Jaw(Straight Recess) •Straight Recess •Cross guide (JN..T series) Base jaw is located using cross guide reducing >Two Piece Jaw Type (with hard jaw and soft jaws) Top jaw can be changed according to application (i.e. hard jaw suitable for heavy cutting, and soft jaw suitable for precisely machining. Each jaw can also be changed easily. Especially, the hard jaw can clamp inner diameter and outer diameter of work. ►Steel body Body is manufactured from high quality steel to increase rigidity, durability and rotational speed. Dimensional Drawings «For dimensions of soft...

Scroll Chuck with Two Piece Jaw IShort taper Direct mount to short taper without the need for separate Supplied with standard hard jaws (fitted). Soft jaw can alSO be used. (Option, used together with JN-T type) Dimensional Drawings

This two jaw chuck provides the optimum solution for gripping valves, pipe joints and other irregularly shaped components ►Straight recess Mounting dimensions are the same as the Dimensional Drawings

| Reliable and effective gripping of irregularly shaped components ►Thin walled materials ensure minimal distortion, even with thin-walled cylindrical pipe ►Straight recess Mounting dimensions are the same as the JN type. Dimensional Drawings

Independent Chuck (Straight Recess) (Straight recess Dimensional Drawings (Note) In IC-4, 6 and 8, there is no T-groove on the chuck surface. «T-slot for jig mounting is provided from IC-10 or more. JKFour mounting bolts are provided. (Except IC-4, chucks are mounted with hexagon socket set screws. Consequently, tap the backplate.) 5KOne hex wrench is attached for the chuck of each size (except IC-4).

Independent Chuck (Short Taper) ►Chuck for short taper that can be directly mounted without back plate