Soft Jaws for Power Chuck 1 ^— Total jaw height. The height of A = Non cut of crest B = Cut of crest L = Light weight N = New type C = Bolt spacing classification (In case spacing is different at same chuck dia.) Hollow 4" = 15mm, hollow 5" = 18mm 12" chuck = 38mm 15" chuck = 43mm Chuck sizes Power chuck soft jaw ■ Combination of Soft Jaws S&Chuck models in parentheses are discontinued models.

Machine Tool Accessories I Combination Table for Standard Soft Jaws I Combination Table for Standard Soft Jaws

Following hatching part

Hard Jaws for Power Chuck Serration pitch C = Bolt spacing classification^ case spacing is different at same chuck dia.) -Chuck sizes -Power chuck hard jaw I Combination of Hard Jaws stsChuck models in parentheses are discontinued models.

8ST-8 is the size of soft jaw mounting bolt. S8ST-8 is the size of soft jaw mounting bolt. iSC'T-8 is the size of soft jaw mounting bolt. &T-8 is the size of soft jaw mounting bolt. S8ST-8 is the size of soft jaw mounting bolt. 8$ Please inform us of the chuck type and T-Nut dimensions before ordering. IDimSnSiOnS and Combination SKChuck models in brackets are discontinued models.

noTMM| Hard Jaws for Scroll Chuck Chuck type Chuck sizes Hard jaw of scroll chuck ■ Combination Table for Hard Jaws

Soft Jaws for Scroll Chuck -Chuck sizes "Soft jaw of scroll chuck

I Back Plate Acceptable table

Chuck Bung

Chuck Grease Chuck Gripping Force 1.5 times (Compared to Standard Grease) Service Life 3 times (Compared to Standard Grease) •Conforms to international standards for health, •Loss of grip over time is reduced Refer to graph below for B206 chuck. •White grease is cleaner and reduces contamination •Various sizes available; 18kg can, 1 kg can, 400g Chuck Grease Pro has been specially developed by Kitagawa by utilising long term experience in many The use of Chuck Grease Pro will extend life, increase gripping force and improve safety. Grease the chuck with a commercial grease gun according to the...

Chuck Grease GREASE NIPPLE

Stationary Gripping Meter | Gripping force can be checked at a glance! Compact design with excellent workability Chuck gripping force is quantified, thus improving quality Integrated detector and display. Easy to handle with a •Zero adjustment NOT required Enables quick measurement with the automatic zero adjustment function! •Measured value memory function Stores three required measured values, and enables later checking. •Power-saving function Saves power with the automatic power-off function. •Battery voltage drop, excessive input, out-of-range The calibration sertificate for ISO-9001 can...

Compatbilrtles of Lathes to Short Taper Chucks First Spindle Second Spindle Nose(JIS) Nose(JIS) Straight, plate Straight, plate

SUPER TURN Dura Turn First Spindle Second Spindle Nose(JIS) Nose(JIS) (Large bore spec) With 2nd main spindle :h 2nd main spindle(Large bore spec) 4000A Type(With 2nd main spindle) 4000B Type(With 2nd main spindle) Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate Straight, plate First Spindle Second Spindle Noss(JIS)...

For mounting a short taper chuck to lathe spbide end Nose shape figure Rear face of chuck Nose dimension figure lAbout lathe spindle end Standards covering the lathe spindle end are Japan major lathe manufacturers manufacture the great majority of lathe spindle end parts at a part of lathe spindle end parts is Although the spindle end dimensions according to each standard are the same, the dimensional tolerance of a face plate (chuck or back plate) Mounting the short taper (direct type) chuck The taper diameter of the short taper chuck for the spindle end is small slightly and the chuck has the...

For order of Scroll chuck •For order of hard jaws of scroll chuck [Internal, External & 2 piece jaw (Top and Base jaws)] ■ SC series • ■ • Bodies of 3, 4, 5, 14 and 16 inches are made of cast iron. JN/JN-T JN..RA series • ■ • Bodies of 12-16 inches are made of steel. In SC series, Hard jaws are ground with the chuck and it is required the tolerance combination on the jaw fitting. As a general rule, Gripping face is ground concentrically in our shop as repair. In JN series, the tolerance combination is not required but Gripping face is need to be ground In case of Base jaw for the 2 piece jaw...

Gripping range External gripping Internal gripping