Albedometers Applications Solar Monitoring for PV Weather Services Climatology Agriculture Research Create an albedometer with two pyranometers and a mounting Two pyranometers and a mounting Large area for satellite data validation In PV plants for bifacial modules All ISO 9060 classes available Analog or digital output Easy to assemble Two similar pyranometers are mounted horizontally, to of the surface changes. The albedometer is mounted low, measure incoming and reflected irradiances in W/m2. The around 1.5 m, and does not need a lower glare screen. ratio of the two is the albedo of the surface below. Large area measurement Select your preferred pyranometers Choose pyranometers depending upon the ISO 9060 For meteorology, climate research and agriculture, the classification and signal output that you require. SP Lite2 mounting is usually high up to measure albedo over a large and CMP3/SMP3 bolt together back-to-back and have a area and to validate satellite data. A glare screen prevents direct radiation reaching the lower detector when the sun is low. Double-dome CMP/SMP pyranometers can be fixed to a CMF1 mounting plate and rod, or the larger CMF4 if you need CVF4 heating and ventilation units. For both Bifacial PV modules generate extra power from light on the configurations a glare screen for the lower pyranometer is rear side that is primarily reflected from the surface below. However, this varies with the type of surface, weather conditions, angle of the sun and shading effects. These variables make it is necessary to measure how the albedo

Double dome CMP/SMP albedometer kit with the lower glare screen, CMF1 mounting plate, and mounting rod Ventilated double dome CMP/SMP albedometer kit with CMF4 mounting plate and mounting rod