Rotators for Crane Attachments
5Pages

KINSHOFER Rotator Line Product Features KINSHOFER manufactures rotators for truck loaders, excavators and logging operations. Years of experience in designing rotators and hydraulic load handling equipment guarantee high efficiency, long lasting rotators, specially tailored to meet your requirements. The gear-type design ensures a very compact and powerful rotator. The precision control and braking ability is especially appreciated by operators. A grapple does not rotate unexpectedly when digging, even under maximum load, and there is no need for stability compensation when handling longer lengths of timber... These are only some of the many working situations where operators appreciate the advantages of using KINSHOFER rotators. KINSHOFER Rotators are the solution. Features of KINSHOFER Rotators The rotator head is made of spherically cast iron or forged tempered steel, depending on operational requirements Upper and lower connections are available in a variety of dimensions and are standard. Kinshofer carries upper suspensions for all current makes and models of cranes. Rotator heads with pin connections are equipped with steel bushings The pressure relief valve, integrated in the rotator head, allows the rotator independence from the hydraulic system of the crane or excavator – where an extra pressure relief valve does not need to be installed All seals are specially designed for the application. All biodegradable synthetic oils are perfectly suitable A very high degree of sealing between the distributor and rotor unit results in minimal internal leakage. Powerful drive and braking moments are therefore possible, even at high oil temperature The rotor unit is made of high quality tempered steel and the outer surface is hardened through a nitrate-coating Generously dimensioned roller bearings guarantee absorption of rated pressure and tension loads and tilting moments The forged, one-piece flange shaft is made of durable tempered steel Horizontal and vertical hydraulic connection of the attaching equipment is possible Oil passages for a single hydraulic circuit are standard and generously dimensioned for high capacity flow. Connection with standard fittings is possible because flange and rotator shaft are a single unit, which also means there are no seams between flange and rotator shaft. Rotators with four oil passages are also available

KINSHOFER Rotator Line Product Range Self weight Upper connection (Width E x Pin-Ø A) Load capacity KINSHOFER Gear Type Rotator with Shaft up to 3000 kg Load Capacity (incl. Fittings) Operating pressure: Pump capacity: Hydraulic coupling - in: Hydraulic coupling - out: Self weight Upper connection (Width E x Pin-Ø A) Load capacity KINSHOFER Gear Type Rotator with Shaft up to 4500 kg Load Capacity (incl. Fittings) * steel motor-head Operating pressure: Pump capacity: Hydraulic couplings: Pump capacity/Operating pressure Self weight Upper connection (Width C x Pin-Ø A) Hole pattern of flange...

Product Range KINSHOFER Rotator Line KM 06 S68-40 KM 06 S69-40 Operating pressure: Pump capacity: Hydraulic couplings – in: Hydraulic couplings – out: Self weight Upper connection (Width E x Pin-Ø A) Load capacity KINSHOFER Gear Type Rotator with Shaft up to 6000 kg Load Capacity (incl. Fittings) 20 - 37 MPa (200 - 370 bar) 25 - 75 l/min Pump capacity/Operating pressure G 1/2´´ > 40 l/min / 200 bar ≤ 40 l/min / 370 bar M 18 x 1,5 KM 06 F140-40 Operating pressure: Pump capacity: Hydraulic couplings – in: Hydraulic couplings – out: Self weight Upper connection (Width E x Pin-Ø A) Hole pattern...

Kinshofer Rotator Line KM 501 – Upper Suspension between Rotator and Crane An upper suspension is a cardan link between rotator and crane. It is available for all current makes and models of cranes. Please specify dimensions when ordering Type KM 501 3000 KM 501 4500 KM 501 6000 KM 501 10000 Self weight (approx. kg) 5 10 15 25 KM 511 – Upper Suspension with Pendulum Damper between Rotator and Crane A pendulum damper reduces the horizontal swing of the attachment. It can also be retrofitted to an existing upper suspension Type KM 511 4500 KM 511 6000 KM 511 10000 Self weight (approx. kg) 15...

KINSHOFER Rotator Line KM 505 – Quick Change System for Shaft-Type Rotators The quick change system enables an easy exchange between different attachments. The mechanical coupling and locking is achieved by the turning motion of the rotator. You simply disconnect quick couplings and disengage the locking device manually. Upper elements of the quick change system are available for all KINSHOFER shaft rotators. The KM 505 system can be used on most attachments which allows the versatility to quickly change the application with a minimum of down-time. Not suitable for heavy duty work. Type...