Orange Peel Grapples Large orange peel grapple for the handling of bulky scrap, the KM 650 large for various applications is available with different tine shapes, different volumes (250l, 350l, 500l), with 4 or 5 tines. ▷ Different tine shapes of the KM 650 series to accomodate handling a variety of materials: • KM 651: fully closing tines for handling swarf, loose waste, soil, gravel etc. • KM 652: half closing tines for handling swarf, scrap, rubbish, waste paper etc. • KM 653: pointed tines for bulky scrap, car bodies, bundled waste paper etc. ▷ Number of tines can be chosen with 4 or 5 tines. ▷ Long life due to a solid design: the hydraulic cylinder pistons are protected by the gripping arms and the hydraulic hoses, connections and oil distributor are positioned in the robust centre section. Special wear resistant materials used in the production of the gripping arms and oversized bearings ensure a long service life for these sturdy grapples. ▷ A lifting-eye on the centre section acts as an additional stop. ▷ Powerful operation with high closing force (13 kN to 18 kN at an operating pressure of 26 MPa). Orange peel grapple KM 650 large Type orange peel grapple, non-return valve Accessories Type recommended KINSHOFER rotator for KM 650 large recommended KINSHOFER rotator for KM 650 large – for heavy duty application recommended KINSHOFER rotator for KM 650 large – for heavy duty application Requirements of truck crane Operating pressure at oil flow: max. 26 MPa (260 bar) at 25 - max. 75 l/min Mind the pressure! Technical drawings We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83607 Holzkir