KM 605U HPX Heavy Duty Clamshell Bucket with Open Shells and HPXdrive
1Pages

{{requestButtons}}

Catalog excerpts

KM 605U HPX Heavy Duty Clamshell Bucket with Open Shells and HPXdrive - 1

Heavy Duty Clamshell Bucket with Open Shells and HP)Cdtive The KM 605U HPX is a powerful clamshell bucket using the ttPXdtive Heavy Duty for handling and easy digging tasks. The open shells enable the handling of bulky materials. Non-return valve, welded hooks and reversible wear plates are delivered on each grapple. The revolutionary HPXdrive technology guarantees a reliable and virtually maintenance free attachment. Reliability of the HPXdi\va\ The movement of the arms of the grapple is generated by two hollow shafts, which run opposed and have a helix thread, hydraulically driven by a single piston. No more hydraulic cylinder. Longer life cycle up to 50%! Self-lubrication:The drive unit runs in a permanent oil^ bath.The compact design makes the MPXdrive resistant to dirt and debris. Versatility with different types of shells that can easily be refitted onto the driving Profitability through low maintenance costs and longer life cycle. Precise handling with the gear-type KinSHOFER rotator and shells synchronised by the single piston turning both shafts of the HPXAtivc. Rotator with shaft is available as an alternative, in case a quick change to a non-rotating hook is Constant closing force (28 kN at 32 MPa operating pressure) over the entire opening and closing process; high efficiency provided by hydro static bearings of the axes. Package Clamshell Bucket KM 605U HPX with KinSHOFER Flanqe Rotator Volume Width E Height max. Opening Number Self Closing force Load of teeth weight capacity Please note: clamshell bucket, rotator KM 04 F140-30V, upper suspension KM 501 4500, wear plates KM 685 07 set, welded hooks KM 685 06 hook set 2, non-return valve - optional the grapple is available with bolt-on teeth - the KM 605U HPX is also available with a shaft rotator and quick change system KM 505 - for heavy duty tasks we recommend the quick change system KM 505 HD in combination with the KinSHOFI Package Clamshell Bucket KM 605U HPX/502 with KinSHOFER Rotator with Shaft and Reduction Link Height max. Opening Number Self Closing force clamshell bucket, rotator KM 04 S, reduction link KM 502 4500, short connecting hoses KM 203 01, upper suspension KM 501 4500, wear plates KM 685 07, welded hooks KM 685 06 hook set 2, non-return valve Requirements of Truck Crane adapters for mounting of compression rails (non-return valve necessary) compression rails - length 720 mm (2 pieces) compression rails - length 1000 mm (2 pieces) side plates to screw onto the grapple for easy digging tasks (4 pieces) mobile part of hydraulic quick coupling for hose (0 10 mm, 2 pieces) hydraulic quick change kit incl. mobile and fixed parts (2 pieces each) mounted with adapters to rotator Technical Drawings Operating pressure: Pump capacity: We reserve the right to amend specifications without prior notice. KinSHOFER GmbH, 83666 Waakirchen, Germany

Open the catalog to page 1

All KINSHOFER catalogs and technical brochures

  1. KM 652-5V

    1 Pages

  2. KM 650 large

    1 Pages

  3. KM 652/2

    1 Pages

  4. C12H

    1 Pages

  5. C10H

    1 Pages

  6. C03H

    1 Pages

  7. C02H

    1 Pages

  8. C05H

    1 Pages