Heavy Duty Clamshell Bucket with Open Shells for Z-Cranes The KM 605U HPX-Z universal grapple with integrated flap rests flat and safe against the crane arm in its transport position. The special flap at the shell carrier allows to transport a large universal grapple, whereat the grapple does not protrude the carrier machine‘s width (2,55 m)* – without any loss in loading volume. The flap is secured automatically by a robust pressure piece with rubber bump. l eliability of the HPXdrive. The movement of the arms of the grapple is R generated by two hollow shafts, which run opposed and have a helix thread, hydraulically driven by a single piston. No more hydraulic cylinder. l onger life cycle up to 50%! Self-lubrication: The drive unit runs in a permanent L oil bath. The compact design makes the HPXdrive resistant to dirt and debris. l rofitability through low maintenance costs and longer life cycle. P l Versatility with different types of shells that can easily be refitted onto the driving unit. l onstant closing force (28 kN at 32 MPa operating pressure) over the entire opening C and closing process; high efficiency provided by hydro static bearings of the axes. l recise handling with the gear-type KINSHOFER rotator and shells P synchronised by the single piston turning both shafts of the HPXdrive. * depending on crane kinematics and mounting Package Clamshell Bucket KM 605U HPX-Z with KINSHOFER Flange Rotator Type max. Opening A Self weight clamshell bucket with flap, rotator KM 06 F140-40, upper suspension KM 501 6000, wear plates KM 685 07 set, nonreturn valve Package Clamshell Bucket KM 605U HPX-Z/502 with KINSHOFER Rotator with Shaft and Reduction Link Type max. Opening A Self weight clamshell bucket with flap, rotator KM 06 S, upper suspension KM 501 6000 , reduction link KM 502 6000, short hoses KM 203 01, wear plates KM 685 07, non-return valve welded eyes / welded hooks (2 pieces) side plates to screw onto the grapple for easy digging tasks (4 pieces) mobile part of hydraulic quick coupling for hose (Ø 10 mm, 2 pieces) hydraulic quick change kit incl. mobile and fixed parts (2 pieces each) mounted with adapters to rotator Requirements of Truck Crane Operating pressure: Pump capacity: Technical Drawings We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany