Clamshell Bucket Robust clamshell bucket for excavators up to 10t / 22000 lbs operating weight. l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges. l educed wear resulting from generously dimensioned bearing R l aximum loading height is achieved through the compact M l xcellent digging characteristics are the result of high closing E forces (37 kN / 8140 lbf at an operating pressure of 32 MPa / 4608 psi). Clamshell Bucket C10H Type KINSHOFER Rotator Continuous rotation and two oil passages. Overload protection is ensured by pressure relief valves. Type Upper connection (width x pin-Ø) (mm/in) 84 x 40 / 3.31 x 1.57 Moment of deflection max. (Nm/ft.lbs) 8500 / 6270 Description upper suspension without pendulum damper upper suspension with pendulum damper adapter for Lehnhoff grab exchange system SW/MS08 without suspension – up to 12t / 26400 lbs adapter for quick exchange systems from other manufacturers available scraper Requirements of Excavator Operating pressure (open/close): Pump capacity (open/close): Operating pressure (rotation): Pump capacity (rotation): Technical Drawings We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany