Clamshell Bucket Robust clamshell bucket in compact form for mini excavators from 2t / 4400 lbs to 3t / 6600 lbs operating weight. l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges. l Reduced wear resulting from generously dimensioned bearing system. l Maximum loading height is achieved through the compact design. l Excellent digging characteristics are the result of high closing forces l Cylinder protection included (starting at width 350 mm / 13.78 in). Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, cylinder protection (starting at the width of 350mm/13.78in), non-return valve and hose guard KINSHOFER Rotator Continuous rotation and two oil passages. Overload protection is ensured by pressure relief valves. Type Upper connection Torque (width x pin-Ø) (mm/in) (Nm/ft.lbs) KM 04 F 84 x 30 / 3.31 x 1.18 850 /625 Accessories Type Moment of deflection max. (Nm/ft.lbs) 3000 / 2215 upper suspension without pendulum damper upper suspension with pendulum damper adapter for Lehnhoff grab exchange system SW/MS01 without suspension – up to 2t / 4400 lbs adapter for Lehnhoff grab exchange system SW/MS03 without suspension – up to 5t / 11000 lbs adapter for quick exchange systems from other manufacturers available scraper Requirements of Excavator Operating pressure (open/close): Pump capacity (open/close): Operating pressure (rotation): Pump capacity (rotation): Technical Drawings We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germa