Specifications:
The document outlines the specifications for Yansen CFast YSCS-X-XXX, which includes a SATA3.0 interface with a speed of 6Gb/s, Low-Density Parity-Check (LDPC) Code, Global Wear Leveling, Flash bad-block management, and Flash Translation Layer with Page Mapping. It supports S.M.A.R.T. and TRIM features.

Features:
The Yansen CFast YSCS-X-XXX is designed for industrial applications, featuring a small form factor suitable as a boot device or data storage. It uses MLC/SLC NAND Flash with LDPC ECC for high performance and reliability. It includes hardware write protection to prevent data modification and deletion. The operating temperature ranges from -20°C to +75°C for the Tianyuan series and -40°C to +85°C for the Tianji series.

Performance:
The device offers sequential read speeds up to 500MB/s and write speeds up to 300MB/s, with 4K random read and write speeds of 18500 IOPS and 19100 IOPS, respectively. It operates at a voltage of DC 3.3V±5% and has a power consumption of 1.5W.

Durability:
The Yansen CFast YSCS-X-XXX is designed to withstand harsh conditions with a shock resistance of 1500G/0.5ms and vibration resistance of 80Hz~2000Hz/20G. It has a storage temperature range of -55°C to +95°C and can operate in humidity levels of 5%-95% RH non-condensing. The device has a mean time between failures (MTBF) of 2 million hours.

Order Information:
The document provides order information for different series and capacities, including the Enhance and Extreme Series, with capacities ranging from 8GB to 64GB and operating temperatures from -20°C to +85°C.

Contact Information:
Yansen provides contact details for inquiries and after-sales service, including phone numbers, email addresses, and office and factory locations in Shenzhen and Dongguan, China.