Specifications:
The Yansen YSHS-X-XXX is a SATA SSD with a SATA 3.0 interface (6Gb/s) and features such as Low-Density Parity-Check (LDPC) Code, Global Wear Leveling, Flash bad-block management, and Flash Translation Layer with Page Mapping. It supports S.M.A.R.T. and TRIM functionalities.

Features:
The SSD is available in two series: the Tianyuan series with an operating temperature range of -20°C to +75°C, and the Tianji series with a range of -40°C to +85°C. It is designed for industrial or server operations, offering a standard 1.8" SATA half-size form factor and utilizing 2D NAND technology with capacities ranging from 8GB to 256GB.

Performance:
The SSD delivers a maximum sequential read speed of up to 550MB/s and a write speed of up to 300MB/s. It supports 4K random read and write speeds of 21700 IOPS and 22000 IOPS, respectively. The power consumption is 2.06W, and it operates at a voltage of DC 5V±5%.

Environmental Specifications:
The SSD can operate within a temperature range of -20°C to 70°C or -40°C to 85°C, depending on the series. It can be stored at temperatures between -55°C and +95°C and withstands humidity levels of 5%-95% RH non-condensing. It is designed to endure shocks of 1500G/0.5ms and vibrations of 80Hz~2000Hz/20G.

Physical Dimensions and Reliability:
The dimensions of the SSD are L54.0mm x W39.0mm x H4.5mm ±0.15mm, and it has a Mean Time Between Failures (MTBF) of 2 million hours.

Order Information:
The YSHS series is available in various capacities and temperature ranges, with specific models for the Enhance and Extreme series. The Enhance series operates at -20°C to 75°C, while the Extreme series operates at -40°C to 85°C.

Contact Information:
For more information, visit www.yansen-ssd.com or contact via phone at +86-755-2698 5379, fax at +86-755-26985365, or email at [email protected]. After-sales service is available at Tel: 400-7799-711 and Email: [email protected]. The office is located in Shenzhen, Guangdong, China, and the factory is in Dongguan, Guangdong, China.