Specifications:
The Yansen YSS600 series is a 2.5'' SATA III SSD designed for high performance with a SATA 3.0 interface supporting 6Gb/s. It features Low-Density Parity-Check (LDPC) Code, global wear leveling, flash bad-block management, and a Flash Translation Layer with page mapping. The SSD supports S.M.A.R.T., TRIM, and Power Loss Protection (PLP).

Features:
The SSD is available in two series: Tianyuan (-20℃ to +75℃) and Tianji (-40℃ to +85℃). It is designed for industrial or server operations with a maximum capacity of up to 1TB using 2D NAND technology. The external DRAM design enhances performance for 4KB files. The SSD includes a powerful hardware ECC engine, power-saving modes, wear leveling, flash block management, S.M.A.R.T., and TRIM support.

Performance:
The YSS600E-X-XXX model offers capacities from 128GB to 1TB with DRAM, achieving up to 570MB/s sequential read and 480MB/s sequential write speeds. It supports 65090 IOPS for 4K random read and 65200 IOPS for 4K random write. The operating temperature ranges from -20°C to 75°C, with storage temperatures from -55°C to +95°C. It can withstand humidity levels of 5%-95% RH non-condensing, shocks of 1500G/0.5ms, and vibrations of 80Hz~2000Hz/20G. The operating voltage is DC 5V±5%, with a power consumption of 4.2W. The dimensions are L100.4mm x W70mm x H7.0mm ±0.15mm, and the MTBF is 2 million hours.

Order Information:
The YSS600 series is available in various models and capacities, including the Enhance and Extreme Series, with temperature ranges from -20°C to 75°C and -40°C to 85°C. Capacities range from 8GB to 1TB, depending on the model and series.

Contact Information:
For more information, visit www.yansen-ssd.com or contact via email at [email protected]. After-sales service is available at Tel: 400-7799-711 or email: [email protected]. The office is located in Shenzhen, Guangdong, China, with the factory in Dongguan, Guangdong, China.