Catalog excerpts
Regenerative DC Electronic Load Regenerative DC Electronic Load PLZ6000R No necessity of special cooling system such as water cooling method Voltage/current/power range: 30 V - 400 A / 60 V - 200 A / 6 kW Power regeneration efciency of up to 90% or more! Six load modes (CC/CR/CV/CP/CC+CV/CR+CV) Easy-to-use design featuring a large-size LCD panel Equipped with major interfaces (GPIB, RS-232C, and USB) as standard
Open the catalog to page 1Regenerative Electronic Load Environment-friendly DC electronic load of the power line regeneration type Capable of regenerating power with clean current waveforms Power regeneration efciency of up to 90% Large capacity 6kW Regenerative DC Electronic Load PLZ6000R is a DC electronic load that regenerates load power to the AC line. Regular electronic loads consume load power by having semiconductor devices convert it into heat. By contrast, PLZ6000R converts load power into reusable electric power, rather than converting it into heat as is typically done, and feeds this power to the AC line,...
Open the catalog to page 2Functions Power regeneration efficiency of up to 90% (at rated power) The use of a proprietary switching technology (patent pending) provides high power regeneration efficiency - from 85% or more at one-third of rated power (2000 W) to a maximum of 90% or more. This energy saving feature greatly reduces the electronic load's environment impact on your plant and it is not necessary to equip special cooling system such as water cooling method to supress the heat generation. Soft start function In constant current (CC) mode, this function causes the load current to rise gradually when the...
Open the catalog to page 3Specications Rating 30 V range 60 V range 30 V range 60 V range 10 mA ± (0.4% of set + 400 mA) 400 mA rms p-p Soft start Operation mode Selectable time range Time accuracy Operating range Setting range Resolution Setting accuracy Input voltage variation Ripple Constant Resistance (CR) mode 134 S to 2.5 mS (7.4627 mΩ to 400 Ω) 34S to 2.5 mS 60 V range (29.412 mΩ to 400 Ω) 136 S to 0 S 30 V range (7.3529 mΩ to OPEN) 34 S to 0 S 60 V range (29.412 mΩ to OPEN) ± (0.5% of set* + 2 A) *set = Vin/Rset 30 V range Operating range Setting range Setting accuracy 2 V for a single line (The sensing line...
Open the catalog to page 4All Kikusui Electronics catalogs and technical brochures
-
TOS9300 Series
28 Pages
-
Warning Light / Buzzer
52 Pages
-
Calibration Equipments
52 Pages
-
KHA Series
16 Pages
-
KFM2005
4 Pages
-
KFM2030
4 Pages
-
KFM2150 System
8 Pages
-
PFX2500 Series
16 Pages
-
PFX2000 Series
8 Pages
-
PFX2000 Series Basic Package
4 Pages
-
PFX2400 Series
8 Pages
-
TOS6200A Ground Bond Tester
52 Pages
-
TOS5200 Hipot Tester
8 Pages
-
TOS9213AS
2 Pages
-
PCR-LE2 Series
28 Pages
-
PWX series
12 Pages
-
PBZ Series
20 Pages
Archived catalogs
-
Electrical Safety Tester
40 Pages