Capacitor Tester CAPACITOR TESTER PFX2400 Series Tester for EDLC (Electric Double Layer Capacitor) test Fully independent channel operations LAN interface handles setting, operation and data collection Capable of measuring voltage of reference electrode Centralized management by dedicated application software Data sampling at 1 ms or 100 ms

ting d for tes he low orte lly supp pacity and t Fu e ca ces. the larg esistance devi lr interna Capacitor Tester The Capacitor Tester PFX2400 Series is dedicated to design charge/discharge testers for electric double layer capacitors. The voltage rating is 5V, targeting single-cell batteries, and a lineup of 4 models is available: 5A/12-ch, 35A/4-ch, 70A/2-ch, and 140A/1-ch. In recent years, the electric double layer capacitor has been increasing its capacity, and it can be used in electric automobiles as power sources for starting the engine and for assistance during acceleration. Wider use...

CAPACITOR TESTER Compliant with IEC 62576(2009) / JIS D1401 ! Electric double layer capacitors for use in hybrid electric vehicles - Standards for charge/discharge characteristic tests Compliant with IEC 62576(2009) / JIS D1401 The PFX2400 series can perform following tests. ● Voltage Hold Test ● Charge-Discharge Efficiency Test Discharge time Discharge time Charge time IR measuring time Charge time Charge time Constant voltage charge time Interval between charge and discharge Rest time after charge Discharge time Charge time for measurement Constant voltage charge time for measurement Constant...

System Configuration Example : PFX2411 Dedicated application software, SD008-PFX2400 is required to run the PFX2400 series. For configuration of the system, in addition to the PFX2400 series and SD008-PFX2400, you will need a PC, network hub, LAN cable and load cable (optional). Product Capacitor tester Application software Load cable PC Network hub LAN cable Model PFX2411 SD008-PFX2400 TL20-PFX *Users are requested to prepare these items Reference electrode LAN cable* Small capacity Memory backup power Load cable TL20-PFX* (Optional) Application software Test sample (EDLC)* (Required option)...

CAPACITOR TESTER Centralized management by PC is capable of setting the test condition to execution of the test and to analysis of the test data Application software The SD008-PFX2400 package contains following three application software. Using the PFX2400 series with this application software, you can create test conditions for the cycle test, voltage hold test and charge/discharge efficiency test and execute the tests. An operation panel is provided independently for each channel, and individual test per channel can be executed. For setting the test conditions, selections for JIS D 1401 and...

Charge function CC CC-CV CP Charge method Constant current charge Constant current charge until the specified voltage is reached, followed by constant voltage charge Constant power charge Charging is performed in steps that are combinations of the CC, CC-CV, and CP modes In CC-CV mode, charging stops when the CV time elapses after charging switches to CV mode Cutoff condition In CC mode, charging stops when the specified voltage is reached Current Charge time Rest time Synchronization In CC-CV mode, charging stops when the specified current is reached after charging switches to CV mode Charging...

CAPACITOR TESTER Measurement accuracy Current measurement Range Accuracy *1 *2 Resolution Sampling time Voltage measurement Reference electrode voltage measurement Range Accuracy *1 *2 Resolution Sampling time Range Accuracy *1 *2 Resolution Sampling time Protection function Overvoltage (Overcharge) protection *3 Setting range Hardware OVP Setting accuracy Operating time Setting range Software OVP Setting accuracy Operating time Undervoltage (Overdischarge) protection *3 Setting range Setting accuracy Operating time Setting range Software UVP Setting accuracy Operating time Overcurrent protection...

Ordering information • Main part [Caution] Application software (SD008-PFX2400) is required in order to operate the PFX2400 Series. Also, the system is not provided with an output cable for connecting the sample (capacitor). Prepare an output cable that is suitable for the sample (capacitor). A separate load cable is required for each channel that is used. KIKUSUI ELECTRONICS CORPORATION 1 -1 -3, Higashiyamata, Tsuzuki-ku, Yokohama, 224-0023, Japan KIKUSUI AMERICA, INC.1-877-876-2807 www.kikusuiamerica.com 2975 Bowers Avenue, Suite 307, Santa Clara, CA 95051 KIKUSUI TRADING (SHANGHAI) Co., Ltd....