KFM2005
4Pages

Catalog excerpts

Fuel Cell Impedance Meter FUEL CELL IMPEDANCE METER KFM2005 The impedance measurement can be performed using AC impedance method Impedance of cells of up to 20V can be measured in the range of 10 mHz to 10 kHz. Two ranges of the constant current mode in 5A and 0.5A are available for the load rating Load current setting resolutions of 0.1 mA ( in 5 A range) and 0.01 mA ( in 0.5 A range) Capable of 0 V operating voltage, equipped built-in electronic load with maximum power consumption of 60 W (applied to the single cell testing) Application software included as a standard accessory External control of the load current, various protection functions are equipped Equipped with GPIB, RS-232C and USB interfaces as standard

Open the catalog to page 1

The measruing instrument and the electronic load are integrated in one single device! Possible to acquire the Tafel plot and the Cole-cole plot of the micro fuel cell (such as cellular phones, laptop computers, and electric power-assisted bicycles, etc.) The impedance meter KFM2005 is designed for testing of the fuel cell with the small current (5 A or less), and not only the current-voltage characteristic test, the KFM2005 can easily measure the impedance of a fuel cell using the AC impedance method, and the Cole-Cole plot. Using the measurement data of the Cole-cole plot, it is possible...

Open the catalog to page 2

FC Impedance Meter KFM2005 ● KFM2005 Configuration The KFM2005 is equipped with the required element of testing fuel cells on a single unit. It consists of an electric load device, voltmeter, ammeter, and impedance meter. LOAD HIGH SENSING HIGH impedance Meter / Voltmeter fuel cells AC constant current circuit (Measurement alternated current) Load device / Ammeter *The picture shown as an example of connecting the PC and the Fuel Cell, the PC and the Fuel Cell are not included in the package of the KFM2005. The data acquisition of each characteristic test is possible by the application...

Open the catalog to page 3

Specifications Impedance measurement part Average setting The integral average (1 to 32) and the moving average (1 to 256) may be used in combination. 240 dots × 64 dots LCD with cold-cathode ray tube backlighting External Control Interface GPIB, RS-232C,USB [Rear panel] 1-877-876-2807 www.kikusuiamerica.com 2975 Bowers Avenue, Suite 307, Santa Clara, CA 95051 Phone : 408-980-9433 Facsimile : 408-980-9409 www.kikusui.cn Room 216,Building 4, No.641,Tianshan Road, Shanghai City, China Phone : 021-5887-9067 Facsimile : 021-5887-9069 ■ All products contained in this catalogue are equipment and...

Open the catalog to page 4