Internet http://www.kikusui.co.jp / Four different power ratings - 165 W, 330 W, 660 W, and 1000 W - fi ve models in totalSupport of 0-V input (PLZ164WA and PLZ664WA)High-speed response supporting a maximum slew rate of 16 A/ s (equivalent to 10 s when converted to a rise time)Support of constant current, constant resistance, constant voltage, constant power, constant current + constant voltage, and constant resistance + constant voltage modesTimer functions combined with time/voltage measurement functions enable battery discharge characteristic evaluations.Booster units provide increased system capacity (PLZ1004W).Features sequence and switching functions.Provided with GPIB, RS-232C, and USB 2.0 ports as standard. >

Evaluation of low-voltage, high-current DC/DC converters for servers > Evaluation Performance evaluation of DC/DC converters for PDA terminals Effective measurement of highly ef cient switching power supplies of AC adapters > 2 PLZ-4W SE RIES size="-1">

For testing switching power supplies, batteries, DC/DC converters, and fuel cells! Multifunctional DC Electronic Load PLZ-4W Series Designed to satisfy demands for lower-voltage, higher-speed, and larger-capacity testing applications Support of 0-V input Minimum setting resolution of 10 A > (PLZ164WA and PLZ664WA) Support of up to 9 kW/1800 A > (for PLZ164/164WA L range) (System confi gured with PLZ1004W and PLZ2004WB) High-speed operation at 10 s GPIB, RS-232C, and USB 2.0 ports provided as standard > (when converted to rise and fall times) The current trend in semiconductors is towards lower...

Operation setting keys LOCAL/LOCK key > These keys are used to set the basic value (current, conductance, voltage, or power), operation mode, range, slew rate, protection function, etc. This rotary knob is used to set various values. You can switch between the coarse adjustment mode and fi ne adjustment mode by pressing the rotary knob. In fi ne adjustment (FINE) mode, the value changes at one-tenth of the rate applied in coarse adjustment mode. Rotating the rotary knob while holding down the SHIFT key changes the contrast of the display. his key is used to switch to the local operation mode...

The current remains constant despite the change in the voltage. V > 1 Input voltage V PLZ-4W SeriesIVConstant voltagepower supply Input current I010(A)I R > Constant voltagepower supplyIVV The resistance remains constant despite the change in the voltage and current. > Input voltage V PLZ-4W Series Input current I0 > 1 VThe voltage remains constant despite the change in the current. V > 1 VConstant voltagepower supply > Input voltage V PLZ-4W SeriesIR Օ Shift in the current waveform with the change in the slew rate Input current I0 voltage) remains constant despite the change in the current and...

Combining four functions - elapsed time display, under voltage protection (UVP), load off voltage display, and auto load off timer - makes it possible to perform two types of measurements that are useful in battery discharge tests - measurement of the time elapsed from the start of discharge until the fi nal voltage is detected and measurement of the closed circuit voltage after the specifi ed time elapses from the start of discharge. Three memories A, B, and C are provided for each range in each mode, and the set values can be saved. The stored set values can be called freely even while the...

KRA3 > 10024.5149 5737.75132.5 KRA150 > (465)482(460) 260260 480 MAX 470400MAX 30 214.5MAX 20 DC input termials : M6 (front), M8 (rear)Power input : AC inlet DC input termials : M6 (front), M8 (rear)Power input : AC inlet * DC input termials of PLZ2004WB is M12 (rear) only Unit: mm > 124 MAX 155 * The depth of PLZ2004WB is 550 mm (Max. 600). Operating area, display area and input termials etc. are not provided in front panel. KRB3-TOS KRB150-TOS > (465)479(460)479 10024.5149 5737.5132 MAX 470400 10MAX30MAXMAX 455429.5 > 128MAX 150 All products contained in this catalogue are equipment and devices...