COLD ROOMS

Cold Rooms

Cold under control KIDE it is a business Group manufacturer of cold-rooms, insulation panels, insulated doors, refrigeration units and drying units, offering integral solutions to its clients and developing valuable relations with the agents it works with. It is aimed at different sectors where activity mostly deals with installers and distributors, and it seeks to stand out in terms of its quality and service, with a value proposal that sets it apart, being a group of reference in a national sphere while having international projection. It is a Group of companies based on cooperative principles,...

Cold Rooms

Highest cold performance Kide guarantees total coldroom Insulation due to High Density PU (injected Polyurethane), which results in an optimum thermal insulation coefficient and perfect panel fitting. SUPERCOP system works with a higher evaporation capacity, due to the large battery surface of the evaporator. Refrigeration units save up to 20 % of energy and the automatic defrosting by hot gas also means lower consumption. MAXIMUM DOOR TIGHTNESS Smart and innovative design for insulated doors. Always offering the maximum guarantee for water tightness and isolation. Panel joint system with 200kg...

Cold Rooms Kide cold rooms and panels keys for constant evolution in kide / Highest Quality / Continuous Service Improvement / Innovation And Latest Technology / Respect For The Environment Trusted for many years by our customers

More than cold rooms, we offer integral service There are many cold room manufacturers in the market, but not all offer such comprehensive and efficient service as Kide. Apart from designing and manufacturing a wide range of products, we are specialists in developing integral solutions. Refrigeration equipment Kideblock: Wall unit Kidesplit, split unit Wall industrial unit Made from anodized aluminium and polyethylene. Available in many sizes. Wheels are optional.

Cold Rooms Kide universal cold room KIDE’S UNIVERSAL MODULAR COLDROOM represents a new generation in modular coldrooms thanks to its many advantages. / Fully interchangeable panels / Much simpler assembly / Easy to extend in any direction / More practical to store and transport Express service obsessed with speed Speed at KIDE is an ongoing commitment, speed of cold room assembly and, it goes without saying, speed of delivery. Our Express Service guarantees your UNIVERSAL MODULAR COLD ROOM will be manufactured in just 48 hours*. But that’s not all, as we can also provide the corresponding refrigeration...

Even quicker and easier to assemble It’s never been easier to expand a cold room Cold room assembly has been made simpler by unifying panel design, making them interchangeable. Any panel can be used for a wall or the ceiling, as they all incorporate an exclusive system whereby then can be assembled in any position. With the UNIVERSAL MODULAR COLD ROOM it’s really easy to expand the size of a pre-installed cold room in both directions. Assembly is fast thanks to asimple hexagonal key supplied with the cold room. A great feature that translates into important time and cost savings. The UNIVERSAL...

Cold Rooms Technical specifications The UNIVERSAL MODULAR COLD ROOM is comprised of prefabricated sandwich type high density injected polyurethane foam modular panels, with a range of thicknesses adaptable to different insulation requirements. / LENGTH Maximum length is 3,200 mm / JOINT SYSTEM Off-centre hook with hexagonal key. / FINISH Galvanized steel sheet, white lacquer, with removable protection film. Slightly ribbed. White colour. Food safe quality. Lacquer: polyester paint, 25 micron. Including primer According to standard EN 10169. AVAILABLE TO ORDER: Flat form. Other finishes. / INSULATION...

/ ASSEMBLY INSTRUCTIONS 1ST STAGE Assembly the floor panels then, fix the corners and adjust the covers. The floor should be completely flat. 2ND STAGE If the cold rooms has no floor, the ground of the cold room perimeter shall be completely levelled width (E+150 mm). Fig A. Fit the corners to the vertical panel and follow assembly the vertical panel. 3. Nylon plug 4. Polyurethane sealant Finish the assembly of the vertical panels, put the upper corners. Assembly the ceiling panels. Place the last corner and adjust the covers.

Cold Rooms Kide modular cold room In the KIDE MODULAR COLD ROOM the union goes in the vertical sense, enabling the assembly of the vertical panels before assembling the ceiling. Therefore, less people are needed for assembly. Moreover, with this system it is possible to dismantle any part of the ceiling without unfastening the vertical panels. By its quick and secure system of joining The fastening system which KIDE has developed, besides being quick and simple, guarantees perfect adjustment between vertical panels, as well as between vertical and ceiling panels. Due to that, the insulation which...

How is it possible to save up to 20% of the time in the assembly of the panel? WITH THE NEW CEILING-WALL SUPPORT BY JOINING THE VERTICAL PANELS KIDE has developed an exclusive system for joining vertical panels with ceiling panels. This system results in important advantages: Another advantage in the assembly of the KIDE MODULAR COLD ROOM is the incorporation of vertical corner pieces. Thanks to these panels, situated in each corner of the cold room, all vertical panels have the same design, resulting in a more simple and flexible assembly system. 1. Ease of assembly and dismantling: The union...

Cold Rooms Technical specifications 1ST COMPANY OF THE SECTOR IN SPAIN WITH The KIDE modular cold room, is made up of prefabricated modular SANDWICH panels of polyurethane. marking according to the European standard EN 14509. MARK FOR MODULAR COLD ROOMS / VERTICAL PANELS Rigid polyurethane foam, neither CFC nor HCFC Average COEFFICIENT OF THERMAL TRANSMISSION “U” The maximum inner height of COLD ROOM is 3.700 mm. Temperature Range: between - 40ºC and +75ºC according to thickness. Slightly ribbed sheet steel, galvanized and prelacquered with polyester (25μ) with a peelable protective film. Exclusively...