Catalogs >
KHS GmbH >
GEAR FLUID 220

GEAR FLUID 220
2Pages

Catalog excerpts

product information synthetic gear lubricant excellent anti-wear properties very good oxidation and mechanical stability distinctive high-pressure properties minimum variation of viscosity ageing resistant good corrosion protection odorless and tasteless *example illustration KHS Gear Fluid 220 is a fully synthetic high performance gear oil with EP properties which have been specially developed for use in machinery used in the food and beverage processing and packaging industry. It is based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry. Certified by NSF to ISO 21469 and registered by NSF (Class H1) for applications where an unintentional Contact of the lubricant with the food not completely can be excluded (lubricant with incidental food contact). industrial gears InnoLine xTr InnoPal InnoKet InnoPack rolling element and plain bearings general oil lubrication The data in this document is based on our general experience and knowledge at the time of publication and is intended to give information of possible applications to a reader with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary field tests with the product selected for a specific application. All data are guide values which depend on the lubricant's composition, the intended use and the application method. The technical values of lubricants change depending on the mechanical, dynamical, chemical and thermal loads, time and pressure. These changes may affect the function of a component. We recommend contacting us to discuss your specific application. If possible we will be pleased to provide a sample for testing on request. KHS GmbH products are continually improved. Therefore the KHS GmbH reserves the right to change all the technical data in this document at any time without notice. V 1.2

Open the catalog to page 1

product information compatibility storage Compatible with the elastomers, gaskets, seals and paints normally used in food machinery lubrication systems. application notes no info All lubricants for the food industry should be separate from other lubricants, Chemicals and food as well as protected from direct sunlight or others Heat sources are stored. storage temperature between 0 ° C and +40 ° C. Assuming that Product is stored under these conditions, We recommend starting it within 3 years Production date to consume. After this Opening the container must be within the product consumed...

Open the catalog to page 2

GEAR FLUID 220 2Pages

Catalog excerpts

All KHS GmbH catalogs and technical brochures

GEAR FLUID 220
2Pages