PLL2261SAUN - Ultra Narrow Beam
6Pages

TECHNICAL DEPT. Lenses Test Report 0° 12 PLL2261SAUN - Ultra Narrow Beam 90° Material = PMMA Full angle at 50% from maximum: ~ 10° Full angle at 10% from maximum: ~ 19° The light spots here represented refer to tests carried out with 1 LED 3.5x3.5mm , and ~ 380 Lumen

TECHNICAL DEPT. Lenses Test Report Fixing Adhesive Tape Technical Drawing 3 High Strength Double Coated Tape with Adhesive 300LSE 9474LE • 9495LE Technical Data Product Description 3M™ High Strength Double Coated Tape with Adhesive 300LSE 9474LE • 9495LE Typical Physical Properties and Performance Characteristics 3M™ Double Coated Tapes with 3M™ Adhesive 300LSE provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and powder coated paints. The acrylic adhesive also provides excellent adhesion to surfaces contaminated lightly with oil...

TECHNICAL DEPT. Lenses Test Report Self-Adhesive Tape Self-Adhesive Tape Press down Heat Sink Circuit Board Welding Plate through hole

TECHNICAL DEPT. Lenses Test Report Thermal shock resistance level Initial Visual Inspection Before starting the tests, a visual inspection was performed in order to check the integrity of the part. The part resulted physically intact. The reference temperature of the component under test is 90° C. Photo: the Lens in the climatic chamber. Temperature set in the climatic chamber Temperature detected on the part by IR thermal camera Final Visual Inspection After testing, a final visual inspection was performed. The result was positive. (view photo) Photo: the part in the climatic chamber after...

TECHNICAL DEPT. Lenses Test Report Packaging Item Total Lens

TECHNICAL DEPT. Lenses Test Report Materials Material PMMA PLL2261xx Temperature resistance: long-term exposure PLL2261xx Temperature resistance: short-term exposure Notes: • The optical values shown are the result of optical simulations carried out with LIGHTOOLS, ASAP and ZEMAX software systems. The optical simulations are carried out on the basis of the typical values provided in the LED manufacturers’ official datasheets. The photometric analysis has been carried out on physical samples. DO NOT HANDLE OR INSTALL LENSES WITHOUT WEARING GLOVES, SKIN OILS MAY DAMAGE LENS OR LIGHT...