AS229701TN1SA - Counterbeam optic for tunnel entrance lighting - 65° Max cd
7Pages

{{requestButtons}}

Catalog excerpts

AS229701TN1SA - Counterbeam optic for tunnel entrance lighting - 65° Max cd - 1

TECHNICAL DEPT. Lenses Test Report 0° 12 AS229701TN1SA - Counterbeam optic for tunnel entrance lighting - 65° Max cd 90° Self-adhesive Fixing Material = PMMA HT Angle 65° max candela Full angle at 50% from maximum: ~ 110°x110° Full angle at 10% from maximum: ~ 144°x130° The light spots here represented refer to tests carried out with 1 LED 5.0x5.0mm and ~ 605 Lumen

Open the catalog to page 1
AS229701TN1SA - Counterbeam optic for tunnel entrance lighting - 65° Max cd - 2

TECHNICAL DEPT. Lenses Test Report ETIPLLSA2039 - Fixing Adhesive Tape Technical Drawing 3 High Strength Double Coated Tape with Adhesive 300LSE 9474LE • 9495LE Technical Data Product Description 3M™ High Strength Double Coated Tape with Adhesive 300LSE 9474LE • 9495LE Typical Physical Properties and Performance Characteristics 3M™ Double Coated Tapes with 3M™ Adhesive 300LSE provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and powder coated paints. The acrylic adhesive also provides excellent adhesion to surfaces contaminated...

Open the catalog to page 2
AS229701TN1SA - Counterbeam optic for tunnel entrance lighting - 65° Max cd - 3

TECHNICAL DEPT. Lenses Test Report Assembly Specifications Self-Adhesive Tape Self-Adhesive Tape Press down Heat Sink Circuit Board M3: Maximum tightening torque ~ 0.4/0.6 Nm Pre-fractured for customized modules

Open the catalog to page 3
AS229701TN1SA - Counterbeam optic for tunnel entrance lighting - 65° Max cd - 4

TECHNICAL DEPT. Lenses Test Report Application Examples

Open the catalog to page 4
AS229701TN1SA - Counterbeam optic for tunnel entrance lighting - 65° Max cd - 5

TECHNICAL DEPT. Lenses Test Report Thermal shock resistance level Initial Visual Inspection Visual inspection to check the lens integrity before the test The part resulted physically intact. The reference temperature of the component under test is 105° C. Photo: the lens in the climatic chamber. Temperature stress in the climatic chamber Temperature detected on the part by IR thermal camera Final Visual Inspection After testing, an expective view is made with positive result (view photo) In the picture: the lens in the climatic chamber after testing. Based on the testing result,...

Open the catalog to page 5
AS229701TN1SA - Counterbeam optic for tunnel entrance lighting - 65° Max cd - 6

TECHNICAL DEPT. Lenses Test Report Total Lens

Open the catalog to page 6
AS229701TN1SA - Counterbeam optic for tunnel entrance lighting - 65° Max cd - 7

TECHNICAL DEPT. Lenses Test Report Materials Material PMMA HT AS2297xxTNx Temperature resistance: long-term exposure AS2297xxTNx Temperature resistance: short-term exposure Notes: • The optical values shown are the result of optical simulations carried out with LIGHTOOLS, ASAP and ZEMAX software systems. The optical simulations are carried out on the basis of the typical values provided in the LED manufacturers’ official datasheets. The photometric analysis has been carried out on physical samples. DO NOT HANDLE OR INSTALL LENSES WITHOUT WEARING GLOVES, SKIN OILS MAY DAMAGE LENS OR LIGHT...

Open the catalog to page 7

All KHATOD OPTOELECTRONIC S.r.l. catalogs and technical brochures