Catalogs >
KEYSIGHT TECHNOLOGIES >
Waveguide Power Sensors

Waveguide Power Sensors
2Pages

Catalog excerpts

Product Fact Sheet Agilent Waveguide Power Sensors Covering the V-band, E-band and W-band spectrums, Agilent’s waveguide power sensors offer best SWR, high reliability and low loss, and come with a 50 MHz calibration port to reduce measurement uncertainties. Waveguide power sensors comparison table E8486A-100 Frequency range Power linearity Maximum power Calibration factor input Connector type Weight 60 GHz to 90 GHz 60 GHz to 90 GHz 50 GHz to 75 GHz –30 to +10 dBm: < ± 1% 60 to –30 dBm: < ± 1.5% –30 to +10 dBm: ± 1% +10 to +20 dBm: < ± 2% 1 –30 to +10 dBm: < ± 1% +10 to +20 dBm: ± 2% +10 to +20 dBm: < +1, –3% 2 +10 to +20 dBm: < ± 1.5% 200 mW average 200 mW average 200 mW average 40 W peak 1 W peak 40 W peak (10 μs per pulse, 0.5% duty cycle) (10 μs per pulse, 0.5% duty cycle) (10 μs per pulse, 0.5% duty cycle) Does not include EEPROM. Users need Comes with EEPROM to store calibration Does not include EEPROM. Users need to pre-enter calibration factors into the factors. Users simply need to input the to pre-enter calibration factors into the power meter; the calibration factor label frequency and the correct calibration power meter; the calibration factor label will be provided on the power sensor unit. factor will be applied. will be provided on the power sensor unit. Waveguide flange: UG-387/U Flange, EIA WR-12 Waveguide flange: UG-385/U Net: 0.4 kg (0.9 lb) Shipping: 1 kg (2.1 lb) 1. For EPM series power meters. 2. For all other Agilent power meters. 75 GHz to 110 GHz ± 2% 200 mW average 40 W peak (10 μs per pulse, 0.5% duty cycle) Does not include EEPROM. Users need to pre-enter calibration factors into the power meter; the calibration factor label will be provided on the power sensor unit. Waveguide flange: UG-387/U

Open the catalog to page 1

Product Fact Sheet Ordering Information Model Description E-Band E8486A-100 E-band power sensor, 60 to 90 GHz, -30 to +20 dBm E8486A-200 E-band power sensor, 60 to 90 GHz, -60 to +20 dBm V-Band V8486A V-band power sensor, 50 to 75 GHz,-30 to+20 dBm W-Band W8486A W-band power sensor, 75 to 110 GHz,-30 to+20 dBm Agilent waveguide power sensors are compatible with the following power meters: • N1911A/12A and N8262A P-series power meters The calibration factor label is provided on the back panel of the E8486A-100, V8486A and W8486A. Recommended service options Additional two years of...

Open the catalog to page 2