RDX Test Solutions for DigRF
17Pages

{{requestButtons}}

Catalog excerpts

RDX Test Solutions for DigRF - 1

Agilent RDX Test Solutions for N5343A DigRF Exerciser Module N5344A DigRF Analyzer Module Data Sheet integrate your DigRF based RF-IC and BB-IC Experience insight from Quickly characterize your mobile handset

Open the catalog to page 1
RDX Test Solutions for DigRF - 2

N5343A and N5344A Analyzer and Exerciser for DigRF Combine custom stimulus generation and real-time analysis to diagnose and characterize your system faster • DigRF v4 link turn-on and debug • Real time DigRF stimulus and analysis • RF-IC prototype turn-on and characterization • BB-IC prototype turn-on and signal processing software development • RF-IC and BB-IC integration and troubleshooting • Automated test • Robustness test with error injection • Low intrusion probing solutions ensure DigRF measurement reliability • Bit level to modulation level measurements for RF and digital design...

Open the catalog to page 2
RDX Test Solutions for DigRF - 3

N5343A and N5344A Analyzer and Exerciser for DigRF (Continued) Integration challenges During the integration phase, it becomes challenging to find the root cause of interoperability issues, that may reside in the digital or RF domains. Digital and RF design teams need a common platform that provides insight in the domain of their choice. Now you can get the capabilities you need with the Agilent RDX N5343A and N5344A DigRF test solution, providing protocol debug and enabling comprehensive cross‑domain test for RF-IC and BB‑IC developers and integration teams. This solution includes a...

Open the catalog to page 3
RDX Test Solutions for DigRF - 4

N5343A and N5344A Analyzer and Exerciser for DigRF (Continued) Digital domain Wireless domain A single platform for both digital and wireless design teams Product structure The test solution allows engineers to work in the domain (Digital or RF) of their choice to quickly characterize the DUT’s digital and wireless behavior and rapidly solve cross-domain integration problems. Wireless physical layer validation Signal analyzer, Signal source, DigRF tester DigRF digital protocol layer debug/validation Now DigRF v4 revision 1.0 compliant! The DigRF test solution consists of: • Windows® XP...

Open the catalog to page 4
RDX Test Solutions for DigRF - 5

N5343A and N5344A Analyzer and Exerciser for DigRF (Continued) Probing solutions The N5344A analyzer module can be connected to the target system through a N5346A flying lead probe for signal access to space constrained devices. Software structure The same hardware modules can be controlled through several user interfaces, providing protocol level stimulus and analysis and modulation level stimulus and analysis. Signal DigRF generation protocol exerciser software GUI (ADS, signal studio) DigRF protocol analyzer GUI Signal inserter Signal analysis software (VSA) Signal extractor Agilent...

Open the catalog to page 5
RDX Test Solutions for DigRF - 6

Typical Test Configurations Active DigRF bus test configuration In this configuration, the N5343A exerciser module emulates a DigRF device connected to the device under test. It can emulate either a BB-IC or an RF-IC, depending of the nature of the device under test. The N5343A can exercise a DigRF bus and monitor the response. N5343A DigRF exerciser module Passive DigRF test configuration In this configuration, the N5344A analyzer module transparently captures traffic between two devices. This configuration is used during the integration phase to trouble shoot the link and solve cross...

Open the catalog to page 6
RDX Test Solutions for DigRF - 7

Typical Test Configurations (Continued) RF-IC test configuration In this configuration, the N5343A exerciser module is combined with an RF signal generator and an analyzer, to provide stimulus and analysis on the RF interface. The same signal generation software and signal analysis software can be used to build stimulus and analyze data on both DigRF and antenna sides of the RF‑IC. N5343A DigRF exerciser module

Open the catalog to page 7
RDX Test Solutions for DigRF - 8

N5343A and N5344A Analyzer and Exerciser for DigRF Use familiar software tools in both digital and wireless domains through the entire design cycle At any time, you can decide to work in the domain (digital or RF) and the abstraction level (physical or protocol) to quickly characterize the device under test and solve cross domain integration problems. If you are a digital design engineer, the digital user interface provides you the features to stimulate the DigRF interface at the link and protocol layer, and observe the system behavior will full packet decoding capabilities. If you are an...

Open the catalog to page 8
RDX Test Solutions for DigRF - 9

Digital Domain User Interface Fully test your design's DigRF link and protocol interface • Configurable DigRF traffic generation • Customize header and payload, and frame sequence generation • Repetitive and loop events • Control and data traffic generation • Low power and high speed mode control • Error insertion to validate device's robustness and error recovery Hierarchical trace display speeds your debug process • Avoid constant scrolling with the hierarchical display that maximizes informa- tion density on the screen * Full decoding capabilities • Compare frames details and easily find...

Open the catalog to page 9
RDX Test Solutions for DigRF - 10

Digital Domain User Interface (Continued) Easily configure traffic and insert errors

Open the catalog to page 10
RDX Test Solutions for DigRF - 11

Wireless Domain Software Tools Use familiar tools to create Digital IQ stimulus and easily embed it into DigRF traffic Digital IQ data can be loaded into the exerciser from a variety of sources, including signal studio and Advanced Design System (ADS). The IQ data is encapsulated into DigRF-compliant The data packets are transferred to the device under test with the proper timing by the exerciser module. Control packets, as specified by the user, can be inserted into the data packet flow while looping through the waveform. With this feature, you can make configuration adjustments - like the...

Open the catalog to page 11
RDX Test Solutions for DigRF - 12

Agilent N5343A Exerciser Module Features and Specifications DigRF v4 specifications Connectors Lanes SMA The exerciser supports a full line with two TX and two RX lines in high speed mode Yes Line rate Loops Conditional branches Timer delay between packets Performance specifications Sequencer control Error injection GPIO bus Error counters Capture buffer Buffer size Trigger conditions Operating system Wrong CRC Wrong CRI Trigger in/Trigger out Disparity error Code error Wrong framing Missing ACK/NAK A 36 pin width GPIO bus can be used for stimulus of proprietary interface Number of CRI...

Open the catalog to page 12

All KEYSIGHT TECHNOLOGIES catalogs and technical brochures

  1. KeysightCare

    8 Pages

  2. I/O Hardware

    18 Pages

  3. X-Series

    23 Pages

  4. CXA X-Series

    8 Pages

  5. Oscilloscopes

    16 Pages

Archived catalogs