Catalog excerpts

Oscilloscopes - 1

Agilent Technologies InfiniiVision 6000L Series Low-Profile Oscilloscopes Data Sheet The most space efficient, and affordable LXI C compliant oscilloscopes Four channels in only 1U space Industry-leading performance: • 4-channel digital storage oscilloscope (DSO) models • Low profile, high density 1U (4.45 cm, 1.75 inches) package • LXI class C compliant • 100 MHz, 500 MHz and 1 GHz analog bandwidth • Up to 4 GSa/s sample rate • Standard 8 Mpts MegaZoom III deep memory The highest performance and lowest cost automated test oscilloscope in its class. • Full-scale connectivity – Standard USB, LAN, GPIB interface with XGA video output • 8-bit vertical resolution (extensible to 12 bits) • Built-in Web browser control • IVI-COM driver • 100% software compatible with 6000A Series portable oscilloscopes • Optional segmented memory application • Optional secure environment mode

Open the catalog to page 1
Oscilloscopes - 2

Low-profile, high-density package saves rack space lU-high 19-inch wide package so it saves your valuable rack space. The oscilloscopes have side and rear air vents (no top or bottom air vents) so other instruments can be mounted directly above or below them. Rack mount brackets and rack rails are standard with every unit. architecture for test systems that's based on proven, widely used standards such as Ethernet. those standards, LXI enables fast, efficient, cost-effective test systems. The InfiniiVision fully LXI class C compliant. oscilloscopes follow specified requirements such as a...

Open the catalog to page 2
Oscilloscopes - 3

Built-in Web control The built-in Web server provides remote access and control of the instrument via a standard Java™-enabled Web browser on your computer. You can communicate with the scope over the scope’s built-in LAN interface. Using the Web browser you can set up measurements, monitor waveforms, capture screen images and operate the scope remotely. Through the remote front panel you have access to the built-in help system that is available in eleven languages. Simply right click on the soft keys to see help for that function. You can also send SCPI commands over the LAN to control...

Open the catalog to page 3
Oscilloscopes - 4

Powerful acquisition with MegaZoom-lll deep memory memory comes standard so you can capture long, non-repeating signals, while maintaining high sample rates and good timing resolution. This lets you quickly zoom in on areas of interest. In single-channel mode with can capture a signal over a 2-msec period with a sampling rate The fast sample rate and deep memory ensure that all high- frequency signal components, acquire Menu Normal Peak Det Averaging | Realtime | Back Panel MegaZoom III deep memory helps you find details buried in complex signals. You can view fast waveform updates of...

Open the catalog to page 4
Oscilloscopes - 5

Mixed signal analysis option If you work with both analog and digital circuitry, the InfiniiVision 6000L Series oscilloscope can help you see more signal activity in your designs. You can upgrade the 6000L Series oscilloscope to a 4 scope +16 logic timing channel mixed signal oscilloscope (MSO). With the MSO you can trigger on any combination of its scope and logic channels. Easy programming transition One of the biggest challenges in a new product’s life cycle is the transition of its test system from development to manufacturing. With LXI, the transition can be achieved much more easily...

Open the catalog to page 5
Oscilloscopes - 6

Agilent InfiniiVision 6000L Series Oscilloscopes: The most space efficient LXI C compliant oscilloscopes Standard rack mount brackets Four channels in only 1U space Status indicators Waveform intensity control (for external display) Ext Trig in, Trig out and 10 MHz ref in/out AutoProbe Interface Standard LAN, USB and GPIB ports Optional 16 logic timing channels (MSO)

Open the catalog to page 6
Oscilloscopes - 7

Performance characteristics Scope input Channels Maximum input CAT I 300 Vrms, 400 Vpk, CAT II 100 Vrms, 400 Vpk With 10073C/10074C 10:1 probe: CAT I 500 Vpk, CAT II 400 Vpk 5 Vrms with 50 Ω input DSO6014L: 1 mV/div to 5 V/div (1 MΩ) DSO6054L: 2 mV/div to 5 V/div (1 MΩ or 50 Ω) DSO6104L: 2 mV/div to 5 V/div (1 MΩ), 2 mV/div to 1 V/div (50 Ω) Input impedance Offset range ±5 V on ranges < 10 mV/div ±25 V on ranges 10 mV/div to 200 mV/div ±75 V on ranges ≥ 200 mV/div Noise peak-to-peak DSO6014L: 3% full scale or 2 mV, whichever is greater DSO6054L: 3% full scale or 3.6 mV, whichever is greater...

Open the catalog to page 7
Oscilloscopes - 8

Performance characteristics (continued) Analog to digital conversion Vertical resolution Sample rate DSO6054L/6104L: 4 GSa/sec half channel, 2 GSa/sec each channel Equivalent-time sample rate: 400 GSa/s (when realtime mode is turned off) Memory depth Time range Acquisition mode Normal, Peak Detect, Averaging, High Resolution Peak detection DSO6014L: 1 nsec peak detect DSO6054L/6104L: 250 psec peak detect High resolution mode Time base Bits of resolution Sinx/x interpolation Trigger system Sources DS06xx4L: Ch 1, 2, 3, 4, line, ext and DO - D15 for MSO enabled DSQ Modes Auto, Normal, Single...

Open the catalog to page 8
Oscilloscopes - 9

Performance characteristics (continued) Logic (D15 - D0) channel triggering (with MSO option) Threshold range (user defined) Threshold accuracy* Predefined thresholds * Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature. External (EXT) triggering Input resistance Maximum input AC (~ 3.5 Hz), DC, noise reject, HF reject and LF reject (~ 50 kHz) Auto probe sense (DSO6014L) Auto probe sense and AutoProbe interface (DSO6054L/6104L) Measurement features Automatic measurements...

Open the catalog to page 9
Oscilloscopes - 10

Performance characteristics (continued) Rectangular, flattop, Hanning Noise floor Frequency resolution Maximum frequency Storage Save/recall (non-volatile) 10 setups and traces can be saved and recalled internally. Secure environment mode (-SEC) ensures setups and traces are stored to volatile memory. Storage type and format USB 1.1 drive on front (/drive0) and rear (/drive5) panels Image formats: BMP (8 bit), BMP (24 bit) and PNG (24 bit) Data formats: X and Y (time/voltage) values in CSV, ASCII XY and binary format Trace/setup formats: Recalled USB 2.0 high speed, 10/100-BaseT LAN,...

Open the catalog to page 10

All KEYSIGHT TECHNOLOGIES catalogs and technical brochures

  1. KeysightCare

    8 Pages

  2. I/O Hardware

    18 Pages

  3. X-Series

    23 Pages

  4. CXA X-Series

    8 Pages

Archived catalogs