Catalogs >
KEYSIGHT TECHNOLOGIES >
Keysight FieldFox RF and Microwave Combination Analyzers, 4/6.5/9/14/18/26.5 GHz

Keysight FieldFox RF and Microwave Combination Analyzers, 4/6.5/9/14/18/26.5 GHz
2Pages

Catalog excerpts

Keysight FieldFox RF and Microwave Combination Analyzers, 4/6.5/9/14/18/26.5 GHz - 1

Product Fact Sheet Keysight FieldFox RF and Microwave Combination Analyzers, 4/6.5/9/14/18/26.5 GHz Delivers Benchtop Accuracy and MIL-Spec Durability to Field Applications FieldFox brings bench-level accuracy into the field by delivering precise handheld RF and microwave measurements that agree with benchtop analyzers. The FieldFox combo analyzer (N991x) base function is a cable and antenna analyzer and can be configured to include a spectrum and full 2-port network analyzer. To save space in a field kit, built-in capabilities can be added to provide up to 10 instruments in 1. Key features –– Cable and antenna analyzer (return loss/distance-to-fault) –– Spectrum analyzer –– Full 2-port vector network analyzer –– Built-in power meter –– Independent signal generator –– Vector voltmeter –– Interference analyzer –– Built-in variable DC voltage source –– Frequency counter –– Built-in GPS receiver –– ECal support –– Pulse measurements Key differentiators –– Rugged and weather resistant: –– Meets MIL-PRF-28800F Class 2, no vents or fans, wide operating temp of −10 to +55 °C (14 to 131 °F) –– Meets IEC/EN 60529 IP53 requirements –– Type tested and meets Procedure 1 requirements for operation in explosive environments. MIL-810G, Method 511.5 –– Portable: Compact, light-weight 3.0 kg (6.6 lbs) package –– Combination analyzers: –– Spectrum analyzer provides best amplitude accuracy ± 0.5 dB, no warm up required –– VNAs can test cable and antenna systems without external cal kits (QuickCal and CalReady) –– Built-in microwave independent signal source with flattened power output makes system verific

Open the catalog to page 1

Keysight FieldFox RF and Microwave Combination Analyzers, 4/6.5/9/14/18/26.5 GHz - 2

Keysight | FieldFox RF and Microwave Combination Analyzers, 4/6.5/9/14/18/26.5 GHz – Product Fact Sheet Function Description Cable antenna analyzer and vector network analyzer Frequency 30 kHz to 4 GHz, 6.5 GHz, 9 GHz, 14 GHz, 18 GHz, 26.5 GHz Dynamic range Up to 100 dB Output power Up to +1 dBm Spectrum analyzer Frequency 5 kHz to 4 GHz, 6.5 GHz, 9 GHz, 14 GHz, 18 GHz, 26.5 GHz Spur-free dynamic range ≥ 105 dB Phase noise −111 dBc at 10 kHz offset Independent source Frequency 30 kHz to 4 GHz, 6.5 GHz, 9 GHz, 14 GHz, 18 GHz, 26.5 GHz General Environmental Meets MIL-PRF-28800F Class 2...

Open the catalog to page 2