Agilent E4990A Impedance Analyzer


Catalog excerpts

Agilent E4990A Impedance Analyzer - 2

Agilent Impedance Analyzer Series Achieve success with the industry standard for impedance measurements Standard Three-Year Warranty Hewlett Packard and Agilent have contributed innovations and product excellence in impedance analysis for over half a century. Whether your application is in R&D, production, quality assurance, or incoming inspection, we take pride in contributing to your success. We strive to deliver complete solutions to meet your needs, from impedance analyzers to a wide variety of test accessories. Achieve success with Agilent’s impedance measurement solutions. Get greater...

Open the catalog to page 2
Agilent E4990A Impedance Analyzer - 3

Agilent E4990A Impedance Analyzer The E4990A impedance analyzer has a frequency range of 20 Hz to 120 MHz. The E4990A provides an industry best 0.045% (typical) basic accuracy over a wide impedance range with a 40 V builtin DC bias source. The equivalent circuit analysis function supports seven different multi-parameter models and helps you to simulate your own equivalent parameter values of components. Five frequency options (20 Hz to 10/20/30/50/120 MHz) and frequency upgrades allow you to choose the most appropriate option with the least amount of investment. The E4990A supports a...

Open the catalog to page 3
Agilent E4990A Impedance Analyzer - 4

Truly User Friendly - Front Panel The E4990A has a simple and intuitive user interface that allows you to make accurate repeatable measurements. View multiple parameters under various conditions at the same time on the large touch screen display. Frequently used func- tions are easily accessed through front panel hardkeys and softkeys that are organized for quick and easy navigation. Sophisticated analysis functions are available for better insight into your designs. with touch screen User-friendly interface and help menu using the front-panel keys, Quick access to all necessary functions...

Open the catalog to page 4
Agilent E4990A Impedance Analyzer - 5

Truly User Friendly – Side and Rear Panel Powerful yet compact, the E4990A will complement any existing testing environment and requires a minimal amount of space. The high stability frequency reference (Option 1E5) allows you to improve the frequency accuracy and stability of the E4990A. The E4990A provides flexible connectivity for remote control and easy test automation. Load measurement data from the E4990A to your PC via GPIB, LAN, or USB (type-B) interface. Digital I/O port (24 bit) is also available for data transfer with an external device, such as a handler. Compact body Depth: 277...

Open the catalog to page 5
Agilent E4990A Impedance Analyzer - 6

Real-World Characterization Under Various Operating Conditions Comprehensive analysis using multi- helps you setup and measure multiple parameters under various operating conditions, such as frequency, test signal level, and DC level dependency. enlarged on the display with one Frequency dependency Frequency dependency is common in all components because of the exis- sweep test frequencies from 20 Hz to 120 MHz over a wide impedance range. It enables accurate evaluation of the frequency response including the self-resonant frequency point of components, such as capacitors and Test signal...

Open the catalog to page 6
Agilent E4990A Impedance Analyzer - 7

Segment Sweep for Efficient Analysis The segment sweep function allows you to divide the sweep range into segments. Each segment, including the frequency range, number of points, averaging factor, test signal level, and DC bias can be set inde- pendently. This can be achieved with a single sweep. The segment sweep setting can also be exported to a CSV Evaluation of a crystal resonator requires that the nominal resonant/ anti-resonant frequencies and some spurious frequencies be determined. You can perform a sweep measure- ment for a specific range, eliminating the ranges that aren't needed....

Open the catalog to page 7
Agilent E4990A Impedance Analyzer - 8

Unparalleled Accuracy The E4990A offers the highest level of impedance measurement accuracy and repeatability over a wide impedance/frequency range up to 120 MHz. 10 M • 0.08% (0.045%, typical) basic impedance measurement accuracy • 25 mΩ to 40 MΩ impedance measurement range (10% measurement accuracy range) • Small trace noise ≤ 0.0005% trace noise for accurate and repeatable measurements (≤ 0.0005 Ω, 100 Ω at 1 MHz, measurement time = 5, 1 sigma with 200 times measurement) 10% impedance measurement accuracy range at Four-terminal-pair of E4990A’s Front Panel (Test signal level = 0.5 Vrms,...

Open the catalog to page 8
Agilent E4990A Impedance Analyzer - 9

Choose Your Test Fixture 16047A (DC to 13 MHz) For leaded. 16034G (DC to 120 MHz) For side electrode SMD. 0603 (mm)/0201(inch) to 3216(mm)/1206(inch) size. 16092A (DC to 500 MHz) For leaded or SMD. The 42942A adapter is required. 16192A (DC to 2 GHz) For side electrode SMD. 1608 (mm)/0603 (inch) or larger size. The 42942A adapter is required. 16196A/B/C/D (DC to 3 GHz) Coaxial fixture specialized for the following SMD sizes: 16196A: 1608 (mm)/0603 (inch) 16196B: 1005 (mm)/0402 (inch) 16196C: 0603 (mm)/0201 (inch) 16196D: 0402 (mm)/01005 (inch) The 42942A adapter is required. 16044A (DC to...

Open the catalog to page 9
Agilent E4990A Impedance Analyzer - 10

Migrating from 4294A to E4990A The E4990A includes all the functionality of the industry-standard 4294A impedance analyzer while exceeding the performance and providing more powerful functions, intuitive user interface and PC connectivity. Five frequency options (20 Hz to 10/20/30/50/120 MHz) and frequency upgrades allow you to choose the most appropriate frequency option with the least amount of investment. Key speciications and function comparison E4990A 20 Hz to 10/20/30/50/120 MHz, ive frequency options are available Measurement parameters Basic accuracy Signal level 5 mVrms to 1...

Open the catalog to page 10
Agilent E4990A Impedance Analyzer - 11

Ordering Information Accessories 100 Ω load resistor for four-terminal-pair extension Power cord Installation guide CD-ROM IO libraries 42941A impedance probe kit Convert four-terminal-pair port configuration to a one-port probe. To use this kit, frequency Option E4990A-120 is required. High stability Rack mount and front handle kit ANSI Z540 compliant calibration 42942A terminal adapter Convert four-terminal-pair port configuration to an 7 mm port. To use this adapter, frequency Option E4990A-120 is required. Option: 42942A-700 Add 7 mm open/short/load set High stability timebase...

Open the catalog to page 11

All KEYSIGHT TECHNOLOGIES catalogs and technical brochures

  1. KeysightCare

    8 Pages

  2. I/O Hardware

    18 Pages

  3. X-Series

    23 Pages

  4. CXA X-Series

    8 Pages

  5. Oscilloscopes

    16 Pages

Archived catalogs