Group: Agilent
Catalog excerpts
Accessories for the B2900 Precision Instrument Family Keysight B2900A Series Precision Source/Measure Units Keysight B2960A Series 6.5 digit Low Noise Power Sources Keysight B2980A Series Femto/Picoammeters & Electrometers This accessory catalog introduces all of the accessories available for use with the Keysight B2900 Precision Instrument Family
Open the catalog to page 1Interface Adapters and Noise Filters 3 Adapters for Resistance Measurement 4 Cable Adapters and Connectors 11 Find us at www.keysight.com Page 2
Open the catalog to page 2Interface Adapters and Noise Filters Short description Banana - Triax Adapter Additional information For 2-wire (non Kelvin) connection Banana - Triax Adapter High Current Ultra Low Noise Filter Ultra Low Noise Filter Low Noise Filter For 4-wire (Kelvin) connection High Current Ultra Low Noise Filter (21V/500mA, 10Ohm) for B2961A/62A Ultra Low Noise Filter (42V/105mA, 50Ohm) for B2961/62A Low Noise Filter (210V/3A) for B2961/62A N1294A-001 Banana - Triax Adapter for 2-wire (non Kelvin) connection: N1294A-020 High Current Ultra Low Noise Filter (21V/500 mA, 10 Ω) for B2961/62A: This adapter...
Open the catalog to page 3GPIO-BNC Trigger AdapterN1294A-031 Digital I/O Trigger Cable for Multiple Unit N1294A-032 Required to use the multiple units of the Control B2901A/02A/11A/12A with EasyEXPERT group+ software High Resistance Meter Fixture Adapter N1413A Adapter to enable to use the N1424A/B/C, N1425A/B, N1427A/B and N1428A with the B2985A/87A for resistance measurement High Resistance Measurement N1414A For resistance measurement using the B2985A/87A Universal Adapter N1414A High Resistance Measurement Universal Adapter for B2985/87A: N1413A High Resistance Meter Fixture Adapter for...
Open the catalog to page 4Device/Component Test Fixture N1295A Test Fixture with 4 Triax Connectors for Keysight B2900A Series Test Fixture 16442B Test Fixture for E5270 and general use Resistivity Cell N1424A For N1413 with B2980 Series(50 mm Electrodes) N1424B For N1413 with B2980 Series(26/50 mm Diameter Electrodes) N1424C For N1413 with B2980 Series (26/50/76 mm Diameter Electrodes) Component Test Fixture N1428A For N1413 with B2980 Series This test fixture has four triaxial connectors, allowing it to make two 2-wire connections or 4-wire connections. The N1295A test fixture...
Open the catalog to page 5Test Fixtures (continued) N1424A/B/C Resistivity Cell: N1428A Component Test Fixture: This N1424A/B/C resistivity cell can be used with the B2985A/87A to measure surface or volume resistivity of insulation materials. Three kinds of electrodes (diameter: 26 mm/50 mm/76 mm) are available to meet various insulation measurement standards such as ASTM D-257. The N1413A adapter is required to use the N1424A/B/C resistivity cell with the B2985A/87A. The 50 mm diameter electrode is furnished with the N1424A. The 26 mm/50 mm diameter electrodes are furnished with the N1424B This N1428A component...
Open the catalog to page 6Triax cable 16494A-001 Low leakage Triax cable (200 V, 1.5 m) 16494A-002_Low leakage Triax cable (200 V, 3.0 m)_ 16494A-003_Low leakage Triax cable (200 V, 0.8 m)_ 16494A-004_Low leakage Triax cable (200 V, 0.4 m)_ _16494A-005_Low leakage Triax cable (200 V, 4.0 m)_ High Current Triax cable 16493L-001 Triax cable for current higher than 1 A (1.5 m) _[Ground Unit cable for B1500/E5260/E5270/41501 (Triax, 1.5 m)] 16493L-002 Triax cable for current higher than 1 A (3.0 m) _[Ground Unit cable for B1500/E5260/E5270/41501 (Triax, 3.0 m)] High Voltage Triax cable N1412A_Low...
Open the catalog to page 7Signal Cables (continued) 16493B Coaxial cable: N1415A Triax to Alligator cable: Soldering sockets used with the N1425 for the B2985A/87A. N1426C Alligator Clips: The 16493B Coaxial cable is suitable for general and low noise applications for up to 40 V and 200 mA Cable length (options): 16493B-001: 1.5 m 16493B-002: 3.0 m U2921A-100 BNC cable - 1.2 m: Triax cable terminated with a male triax connector on one end and three alligator clips on the other. It supports up to 200 V and 1A DC. It is compatible with the B2901A/02A/ 11A/12A, B2961A/62A and B2981A/ 83A/85A/87A. The U2921A-100 Coaxial...
Open the catalog to page 8Digital I/O cable 16493G-001 For triggering use among the B2901A/02A/11 A/12A and the B2961A/62A (1.5 m) 16493G-002 For triggering use among the B2901A/02A/11A/12A and the B2961A/62A (3.0 m) Digital I/O T-cable N1253A-100 Digital I/O T-cable for trrigering RS-232 Cable Kit 34398A RS-232 cable kit for Digital I/O of the B2980A Series for triggering Interlock cable N1294A-011 For 16442A/B test fixture (GPIO Dsub25 to 6pin mini plug, 1.5 m) N1294A-012 For 16442A/B test fixture (GPIO Dsub25 to 6pin mini plug, 3.0 m) N1411A 4 pin terminal...
Open the catalog to page 9Interface Cables (continued) N1411A/B: Interlock cable: N1411A/B is an interlock cable terminated with a 4-pin terminal plug on one end and 6-pin circular plug on the other. It is compatible with the B2981A/83A/85A/87A. Cable length (options): N1411A: 1.5 m N1411B: 3.0 m N1294A-031 GPIO - BNC Trigger Adapter: This adapter is used to route the triggering signals from the instrument’s GPIO Dsub25 connector for two coax connectors. It is available for the B2901A/02A/11A/12A and the B2961A/62A. In addition, you can access any of the Digital I/O signal pins by soldering a wire to the...
Open the catalog to page 10Triax(m) to BNC (f) adaptor N1254A-101 Triax(ma[e) to BNC (female) adaptor Triax(f) to BNC (m) adaptor N1254A-102 Triax(female) to BNC (male) adaptor Triax(m) to BNC (f) adaptor N1254A-103 Triax(male) to BNC (female) adaptor Triax (f) to BNC (m) adaptor N1254A-104 Triax (female) to BNC (male) adaptor Triax (f) to BNC (m) adaptor N1254A-105 Triax (female) to BNC (male) adaptor Triax (m) to BNC (f) adaptor N1254A-106 Triax (male) to BNC (female) adaptor Triax (m) to Triax (f) adaptor N1254A-107 Triax (male) to Triax (female)...
Open the catalog to page 11Cable Adapters and Connectors (continued) N1254A-107 Triax (m) to Triax (f) adaptor Triax tee adapter, male- female - female. It supports up to 200 V. Female triax to male triax adapter. Male guard is connected to sense, and female guard is connected to the body. N1416A/B: Triax bulkhead connector This adapter is used to convert the Low output of the N1294A-002 Banana Triax Adapter from Kelvin to non-Kelvin sensing. Dual Banana to BNC adapter for connecting instrument with dual banana jack 1250-2618: Triax (f) to Triax (f) adapter Triax bulk-head connector for soldered connections. N1416A...
Open the catalog to page 12All KEYSIGHT TECHNOLOGIES catalogs and technical brochures
-
Network Visibility Products
24 Pages
-
RF Products
20 Pages
-
Basic Instruments
34 Pages
-
InfiniiVision 2000 X-Series
31 Pages
-
Signal Analyzers X-Series
21 Pages
-
KeysightCare
8 Pages
-
FieldFox and Nemo Handy
4 Pages
-
Impedance and Network Analysis
42 Pages
-
E4990A Impedance Analyzer
12 Pages
-
Keysight N6780 Series
10 Pages
-
E5071C ENA Network Analyzers
18 Pages
-
Keysight Process Analysis
7 Pages
-
BenchVue Software
2 Pages
-
Keysight Process Analysis
7 Pages
-
PXI RF Switch Modules
2 Pages
-
I/O Hardware
18 Pages
-
Digital Multimeters
28 Pages
-
Data Acquisition - DAQ
32 Pages
-
PCIe Digitizers
8 Pages
-
2015 Optical Component Test
40 Pages
-
Power Products Catalog
215 Pages
-
N9000A CXA Signal Analyzer
2 Pages
-
Agilent 89600 VSA Software
8 Pages
-
X-Series
23 Pages
-
CXA X-Series
8 Pages
-
SOLUTION BROCHURE
6 Pages
-
Waveguide Power Sensors
2 Pages
-
Power Meters and Power Sensors
34 Pages
-
E7515A UXM Wireless Test Set
2 Pages
-
E5063A Network Analyzer
8 Pages
-
N9320B RF Spectrum Analyzer
12 Pages
-
E5052B Signal Source Analyzer
21 Pages
-
N9038A MXE EMI Receiver
22 Pages
-
RDX Test Solutions for DigRF
17 Pages
-
M9252A DigRF Host Adapter
2 Pages
-
M9502A and M9505A
12 Pages
-
Oscilloscopes
16 Pages
-
Agilent Power Products
31 Pages
-
LIGHTWAVE CATALOG VOLUME I 2013
40 Pages
-
U4301A PCIe Analyzer
7 Pages
-
N9030A PXA Signal Analyzer
32 Pages
Archived catalogs
-
Agilent Technologies - Catalog
40 Pages