K-TEK-M280-FN-BL-FC-DM
3Pages

{{requestButtons}}

Catalog excerpts

K-TEK-M280-FN-BL-FC-DM - 1

MODEL NO.: K-TEK-M280-FN-BL-FC-DM DESCRIPTION: 86 keys IP67 fully sealed and durable embedded ultra thin rugged silicone rubber keyboard, with built-in ultra-thin dot matrix Flexible Printed Circuit and semi-reinforced ultra-thin stainless steel back plate, 12 function keys(F1, F2, ... F12) are on top line for easy operation, with combination numbers on letter keys for full keyboard functionality. The keyboard surface adopts silicone rubber material and carbon contact + FPC carbon-on-gold key switch technology, with 1.50mm±0.10mm key travel with extremely good tactile feeling for fast and accurate data input without any noise, there will be no key value missing, no stuck key during the keyboard operation, with durable coating & anti-microbial keyboard surface withstand most chemicals and liquids under harsh environment. FN + Clean combination keys for easy cleaning without taking the keyboard away from PC to avoid mis-operation or mis-typing. Adjustable white backlight included, panel mount solution. Designed to meet MIL-STD-810F (wide temperature, shock, salt mist, vibration, fungus, humidity etc.), Which can also meet the critical military standards in these 10 aspects: reliability, safety, maintainability, testability, supportability, environmental adaptability, stability, compatibility, consistency, and continuity. Dimensions: 280.0mm x 97.3mm (Front Panel)

Open the catalog to page 1
K-TEK-M280-FN-BL-FC-DM - 2

Carbon contact + FPC carbon-on-gold key switch technology Switch life more than 5 million of operations Actuation Force ELECTRICAL DATA Supply Voltage Current Rating ≤30mA when backlight is off, ≤300mA with backlight on All Windows, Linux, Unix, Mac OSX, Vxworks, Android, (U-cos--To be confirmed). ENVIRONMENTAL ADAPTABILITY Operating temperature Storage temperature Humidity test 1. Test temperature: 30℃~60℃, 2. Test humidity: 95%RH, 3. Test period: 24h as a cycle, 10 cycles, total 240h Atmospheric pressure Vibration test Shock test 1. Pulse waveform: post-peak sawtooth wave 2. Peak...

Open the catalog to page 2
K-TEK-M280-FN-BL-FC-DM - 3

Slat spray test 1. Place the sample into the Salt Spray Corrosion Test Chamber, temperature inside the chamber is 35 ℃; Spray the sample with a NaCl test solution with a concentration of 5 ± 1% and a PH value of 6.6 for 24h at a pressure of 96kPa; Test duration is 24 h. 2. After 24h of spray, dry and store the sample for 24h in an environment with temperature of 23 ℃ and humidity of 50%; 3. Steps 1-2 as one cycle, test for 2 cycles, total 96 h. 4. After the test, exhaust the fog for 10 min, check the sample after cleaning it with flowing water under standard atmospheric conditions. Rain...

Open the catalog to page 3

All Key Technology (China) Limited catalogs and technical brochures