KuLi-electrical short stroke actuator

KuLi - electrical short stroke actuator Description Compact and fast electrically operated linear drive. The drive is particularly suitable for use in automation and conveying technology. The parameterization takes place via a connect box (sold separately). The control electronics are integrated. Special features Compact design: We achieve a stroke of 40 mm with a housing length of just 67 mm Powerful and dynamic: Thrust/tensile forces up to 300 N, speed up to 445 mm/s Easy parameterization: User friendly software and connect-box Integrated control: Configuration and teach-in of the system without...

Electric Motor Spindle Drives Stroke length / Max. travel path Spindle pitch Max. holding force (static) Supply voltage Max. current consumption (Peak) Power consumption Resolution of the encoder system IP 24 (with anti-twist device) Ambient temperature 1) With increasing load and number of cycles, the repeat accuracy will change due to wear and tear 2) The service life can vary depending on operation and installation conditions and is load-dependent (see chart) 3) One cycle= extend-pause-retract-pause Shock resistance in the static state according to IEC EN 60068-2-27: 50 g 11 ms Vibration resistance...

Parameterization with standard-software variants Finer force-travel time adjustments are possible with software variants KuLi-XX-X-DM/SM/PM in 50 N-increments with the help of the parameterization software by computer (if necessary). The software can be downloaded from www.ketterer-drives.com on the product page. Transmission of the parameterization via the connect box . DYNAMIC Parameterization with software mode Expert (Ex) Expert Mode (KuLi-XX-XX-X-EX-X-X) offers a maximum of adjustment options to your application. Settings possible in the following areas. Expert Mode (6 mm) Thrust/tensile...

Electric Motor Spindle Drives back left below The pin position can be selected flexibly to suit the application M12-plug with a digital input for the command signal and with two digital output for feedback signals and position status According to the connector current carrying capacity definition, permanent operation of KuLi is not a permanent load for the power supply connector The required short-term current consumption of 10 A for KuLi is permissible for the connector operation View A Plug size Number of contacts Plug/ socket Contact Gender Nominal current (current carrying capacity)*) 4 A ,...

KuLi with anti-twist-device Mounting bore holes 47.5 Mounting bore holes Mounting bore holes M4/6 deep 2x Tightening torque 2.5 Nm M4/8 deep 4x Tightening torque 2.5 Nm Mounting bore holes

Electric Motor Spindle Drives KuLi – child‘s play to operate Simple I/O control: The KuLi short-stroke linear drive can be connected to the controller with a simple M12 cable. In I/O mode the drive is controlled via the digital input (control input). Drive commands: 0V on the control input -> thrust rod retracts 24V on the control input -> thrust rod extends to be provided kundenseitig by the user bereitzustellen Steuerung Control Kommunikations-Kabel Communication cable kundenseitig bereitzustellen Steuerung Parametrierung über Connect-Box: kundenseitig bereitzustellen Simple configurations are...

B. Ketterer Söhne GmbH & Co. KG Bahnhofstrasse 20 78120 Furtwangen Germany Telefon: +49 7723 6569-10 E-Mail: [email protected] Web: www.ketterer-drives.com