Kern envelope sealing control Control system for envelopes The module verifies whether the flap of an envelope has been properly glued or whether there are open areas. Our Services ■  ersonal consultancy on-site P ■  equirement analysis, and R solution proposal according to customer needs For this purpose, the envelope is uniformly illuminated by means of an LED light band and then images at a suitable angle with a wide-angle camera. or more sectors (ROI = Region Of Interests) on the envelope can be modelled in the software and evaluated with a sensitivity that can also be set. The software can evaluate shadow areas that inevitably occur due to an incorrectly closed envelope flap. Depending on the analysis result, when a threshold value is reached, the decision is made whether or not to divert out the envelope. Since the relevance of a non-sealed area depends on the type of application (pay slips must be completely closed right up to the edge, info letters on the other hand, may have tolerances), one The e sealing control for envelopes can be used with the Kern 3500 (SL) and Kern 3600 inserting systems, other systems on request. ■  Installation by Kern AG ■ System integration ■  n-site training of your employees O ■  eliable support and maintenance R during operation ■  ustomer-oriented service models C Features ■ Length: 1150 mm ■  eight: 860 mm H ■  idth: 340 mm W June 2020 _ V1 _ The specifications are not contractually regulated and may change without further notice. Kern AG 3510 Konolfingen Switzerland Phone +41 31 790 35 35 i