Technical data Designation Max. permissible slip power*** Max. permissible operating temperature Rotor moment of inertia Starting current* Product code Rated torque set to +/- 10%. Different torque values can be applied on request. This is limited by the residual torque and the maximum permissible slip power. Value determined at room temperature (22°C). Taking into account the maximum permissible operating temperature, the brakes may also be overloaded momentarily. Brake version BDH 1 and BDH 3 are also available with a hollow shaft. Further information is available on request. The drawings and data in this document are provided as general information for our customers. For specific use cases, a separate quotation must be requested. Kern Antriebstechnik GmbH accepts no responsibility for any errors found in the respective datasheets. Kern Antriebstechnik GmbH reserves the right to make changes to its products without prior notice. This also applies to products currently available on the market, provided that – unless otherwise specified – the modification in question does not restrict the product’s usability. All goods and trademarks mentioned in this datasheet are the property of Kern Antriebstechnik GmbH. Kern Antriebstechnik GmbH Gutenbergstrasse 11 88046 Friedrichshafen