Kern paint heaters Improved economic efficiency in the industrial coating industry Advantages for the hot spray process with paint heaters • Solvent saving The hot spraying process saves not only solvents but the increased expenses for the treatment of supply- and waste air as well. • Thicker layers The paint heater leads to a better coverage and therefore to thicker and more dense layers up to 30 %. A second coat is often no longer neccessary. • Material saving Due to the lower applicable pressure, savings of the material overspray up to 20% are possible. The nozzles and pump components are not worn out too quick as well. • Time saving The lower viscosity allows quicker work, and saves often the second coat. Additionally the drying time can be shortened. • Environmental protection and health advantages Less solvents leads to an improved working environment of the spray-painters and a better ecological protection. Kern Antriebstechnik GmbH Gutenbergstr. 11 D-88046 Friedrichshafen T: +49 (0) 75 41 | 50 16 - 0 F: +49 (0) 75 41 | 50 16 - 28 [email protected] www.kern-motion.com PP_FW01_en 2013 KERN PAINT HEATER

Temperature regulation between 20°C and 85 °C Explosion-proof with ATEX certificate Applicable in stationary or mobile units All wetted parts complete from stainless steel Single or dual-channel versions APPLICATIONS Facade coating Steel constructions Heavy- and special vehicles Kern paint heaters are applicable for all pumpable and gaseous media for all solvent- and waterbased varnishes, base or top coat lacquers and dispersion paints. Two component coatings are as well useable as the combination of two types of paints. The hot spray equipment is an economical way for industrial varnishing processes!...