Technical data Values at rated voltage Rated voltage Min. no-load speed (HS/SL) No-load current Rated speed Mech. power (max. continuous power) * Rated torque (max. continuous torque) Rated current (max. continuous current) Starting current (no-load) Max. temperature of motor housing Ambient temperature range Electrical poles / phase Magnetic pole pairs Terminal resistance (phase to phase) Terminal inductance (phase to phase) Torque constant Speed constant Starting time constant per 1000 rpm Motor weight ** Motor connection cable Data connection cable Taking into account an ambient temperature of 22°C and assuming that the motor is mounted on a steel plate with A ≥480 mm². The weight and dimensions may vary depending on the specification or variant. Note The motor values may vary depending on the controller used and its power loss. Hall sensors Setting the switching times (Hall sensor to phase) Beispiel: signal hall sensor Hallsensor U1 BEMF neutral point BEMF to U zu Sternpunkt Kern Antriebstechnik GmbH Gutenbergstrasse 11 88046 Friedrichshafen

Operating range (schematic diagram) Continuous operation (S1) Taking into account the ambient temperature (22°C), the maximum permissible motor temperature is reached under continuous load. Momentary operation (S3) The motor may be subjected to recurring momentary overloads. 4 Dimensions hall sensor cable motor cable Optional upon request • Sensorless • Protection class up to IP67 (standard: IP52) • Customised connector plug nicht anders definiert: -0,6 +0,4 n mm / Gratfrei / Keine scharfe Kanten / Oberflächenwert von Ra1,6. • Connection cable with customised length (standard: 0.5 m) otherwise...