Fasteners for thin sheet metal Anchor® Clifa® Technical publication No.40 ... technologies for a reliable hold

Fastening technology from KerbKonus are in successful applications in a wide variety of different industrial sectors around the world. State-of-the-art production facilities provide our customers with the assurance of quality and reliable delivery, and sophisticated fastening solutions for every conceivable field of application are implemented by our own Research and Development Department. Close cooperation and exchange of experience and expertise on an international level ensure that our company stays at the cutting edge of technological development. With independent branches and agencies operating...

Threaded inserts for thin sheet metal parts ... Dimensions Receiving hole Torque strength Specifications Product features Other details M3 to M5 for plastics Pre-punched medium Works Standard Page 19 drilled 506 7 to 518 7 M2 to M8 Weight and Pre-punched medium Works Standard Page 8 space-saving drilled 721 to 738 M3 to M12 Threaded blind Pre-punched high Works Standard Page 9 hole drilled 741 to 758 Threaded inserts from KerbKonus … Anchor® rivet bushing Anchor®-Mini Anchor® tank type M2 to M10 for metal Pre-punched high Works Standard Page 12 drilled 500 0 to 503 0 Clifa®-M M3 to M5 Spacer...

Quality System Dekra Certificate in accordance with ISO 9001:2002 Reg.No. 30507428 ISO/TS 16949:2002 Reg.No. 160507011 ISO 14001:2004 Reg.No. 170507049 2 At our parent plant in Amberg, we produce threaded inserts using efficient production methods. A team of qualified and highly motivated staff guarantees a consistent, high standard of production. The number of products manufactured over the company's history reaches into the billions. State-of-the-art automation lines manufacture around the clock in a precise and high standard of quality. The efficient and low-cost production of large-scale...

… technologies for a reliable hold 3 Applications on the test stand ... Threaded inserts from KerbKonus are manufactured in large piece numbers. Human lives and safety can often depend upon these tiny components, for instance in the case of airbag receiving fasteners. Because we bear this heavy responsibility, our products are tested and monitored in line with the most stringent directives. In the case of particularly critical applications, each and every part is exhaustively tested on state-ofthe- art test equipment before it is delivered to you. The loading capacity of a thread de - pends primarily...

4 Anchor® - serrated rivet bushing ... The Anchor rivet bushing is a threaded insert made of steel or rustproof material, brass or light alloy with a counterbored and serrated shank. Anchor is riveted into thin-walled moulded parts with pre-punched receiving holes. During this process, the riveted serrations of the shank cut into the side wall, creating an absolutely secure fastening. The special shape of the shank and the countersinking at the bottom protect the thread from damage during installation. In almost all application cases, overload testing indicated that Anchor remains firmly seated...

… technologies for a reliable hold 5 Special request We recommend Space and weight-saving design Thread seal Distanced fixture Support or bearing function Flush finish to the surface of the metal Extremely high loads (torque / push-out forces) or seal between the Anchor and the sheet metal If lower seating strength is sufficient, e.g. in plastic or soft metal panels Mini-Anchor with small outer dimensions (Works Standard 721 to 738) Tank-type Anchor with blind thread (Works Standard 741 to 758) Anchor in special lengths Anchor without internal thread (special version) Processing using Anchor...

6 E 150 R1+R2 E2 E1 R1 R2 F F Sheet metal Pressure body Anchor Rivetting tool Helical spring Anchor retainer Anchor® installation ... Installation Punch or drill a hole, insert Anchor and rivet the shank with a simple rivetting tool (Fig. 1 + 2): • manually • using a pneumatic manual rivetting hammer • using a simple press • by inserting Anchor and rivetting using a tumble or radial riveting process • automatic feed in follow-on tools • with special high-performance installation devices for large-scale series. Output up to 50 parts per minute • To avoid deformation of thin sheet metal components...

Anchor® Works Standard 701 0 to 718 0 Rivet Bushing serrated … technologies for a reliable hold Kerb-Konus-Vertriebs-GmbH • P.O.Box 16 63 • 92206 Amberg • Phone +49 9621 679-0 • Fax +49 9621 679444 7 8,0 8,0 8,0 9,5 9,5 11,0 12,5 16,0 19,0 25,4 25,4 25,4 Application Anchor is a rivet bushing for captive, torque-resistant screw connections capable of withstanding loads from both sides in thin-walled workpieces (0,5 to 5 mm thickness) The Anchor is suitable for thinwalled moulded components made of - steel - alloy - NF metals and - plastic Dimensions in mm Article no. of the second and third group...

Anchor®-Mini Works Standard 721 0 to 738 0 Rivet Bushing serrated 8 Kerb-Konus-Vertriebs-GmbH • P.O.Box 16 63 • 92206 Amberg • Phone +49 9621 679-0 • Fax +49 9621 679444 5,0 5,5 5,5 7,0 7,0 8,5 10,0 12,0 Application Anchor-Mini is a rivet bushing for captive, torque-resistant screw connections capable of withstanding loads from both sides in thin-walled workpieces (0,5 to 5 mm thickness) made of - steel - alloy - NF metals and - plastic The Anchor-Mini is particularly weight and space-saving due to its minimal outside dimensions. Dimensions in mm Article no. of the second and third group of digits...

Anchor®-Tanktyp Works Standard 741 0 to 758 0 Rivet Bushing serrated … technologies for a reliable hold Kerb-Konus-Vertriebs-GmbH • P.O.Box 16 63 • 92206 Amberg • Phone +49 9621 679-0 • Fax +49 9621 679444 9 Application Anchor-Tank Type is a rivet bushing with a threaded blind hole (sealed thread) for captive, torque- resistant screw connections in thin-walled workpieces. (0,5 to 5 mm thickness) The Anchor is suitable for thinwalled moulded parts made of steel, light alloy, NF metal and plastic. Example for finding Serrated rivet bushing Anchor Tank Type with internal thread M5 made of steel...