*mydirectindustry

Catalogs
Kerb Konus
Punching Rivet and Composites ?

Punching Rivet and Composites ?

Product catalog summary

Punching Rivet and Composites Overview

Specifications:
- Multigrade Rivet: Adheres to Works Standard 492 1, suitable for light-alloy (1.7 mm), 22MnB5 (0.8 mm), and light-alloy (1.7 mm) layers.
- Punching Rivet: Complies with Works Standard 492 0, designed for magnesium (3.0 mm) and light-alloy (2.0 mm) layers.
- Special Rivet: Follows Works Standard 492 0, applicable for FRP (2.3 mm) and light-alloy (1.7 mm) layers.

Repair Procedures:
- For small quantities or repair tasks, a rechargeable battery-operated manual riveter is recommended.
- A single battery charge supports approximately 300 riveting operations, with a full recharge taking about 60 minutes.
- The riveter can also be powered directly from a 230V mains connection.
- Riveting requires access to both sides of the material.

Catalog excerpts

Punching Rivet and Composites … Multigrade Rivet according to Works Standard 492 1 Light-alloy t = 1,7 mm + 22MnB5 t = 0,8 mm + Light-alloy t = 1,7 mm Punching Rivet according to Works Standard 492 0 Magnesium t = 3,0 mm + Light-alloy t = 2,0 mm Special Rivet according to Works Standard 492 0 FRP t = 2,3 mm + Light-alloy t = 1,7 mm Repair with Hand Riveter … For small piece numbers or repair jobs, a rechargeable battery-operated manual riveter can be used together with suitable solid punched rivets. One battery charge is sufficient for around 300 riveting operations. A full charge takes around 60 minutes. The riveter can also be operated directly from a 230V mains connection. The riveting operation requires access on both sides. 8 Battery Hand Riveter

Open the catalog to page 1

Punching Rivet and Composites ?

Punching Rivet and Composites ?

Catalog excerpts

All Kerb Konus catalogs and technical brochures