Nystay® - the precoating intended to keep fasteners „in their place“ during transportation and assembly … Nystay® is a plastic precoating which is applied directly to the shank of fasteners in order to secure them during transportation or assembly in their relevant application/assembly group. Field of application • No chemical hardening Nystay® can be used for all fasteners – whether threaded or not. It facilitates preassembly, especially in case of automatic feeders and robot applications. The range of applications is, of course, not restricted to screws, but encompasses all fasteners such as shafts, rivets, studs, pressed and turned parts etc. 12 • Holds fasteners in place during transport, assembly or installation • May be positioned at any optional location on the shank of a fastener Product features: • Non-toxic and environmentally friendly – plastic coating on polyolefin basis • Shortens assembly times for end user User benefits: Screws coated with Nystay in the thread area can be pre-inserted into the component. The coating fixes the screw reliably in the borehole. The end user will therefore receive a subassembly already preassembled with screws, eliminating the need for tedious selection and insertion of appropriate screws. At the same time, fastener stocks can so be reduced and simplified. Operating and cycle times during final assembly can be drastically shortened when using pre-assembled components.

... technologies for a reliable hold Nystay® precoating Works Standard 903 4.. Application Nystay is welded directly onto the fastener shank. This creates a flexible, annular layer providing reliable protection against loss for pre-assembled components during transportation or storage. Dimensions in mm Suitable for screws/bolts from Article number A M 3 M 4 M 5 M 6 M 8 M 10 903 400 030.000 903 400 040.000 903 400 050.000 903 400 060.000 903 400 080.000 903 400 100.000 Ringdiameter (guidline value) A Ø 3 Ø 4 Ø 5 Ø 6 Ø 8 Ø 10 Example of how to find the article number Material: Operating temperature:...