... technologies for a reliable hold Mubux®-MO – the coated threaded insert ... Threaded insert Mubux-MO is made of zinc-plated steel, with internal and external threads. It is coated on the outside with precote 80. 1. Drill the retaining hole. Application range 2. Tap the thread with a standard thread tap. Mubux-MO is used wherever a vibration-free firm fit and extremely good sealing properties are required in addition to a high thread load capacity and wear resistance. It is suitable for a wide range of different materials from plastic to steel, for minimal wall thicknesses and extremely brittle materials. Product features • Low installation costs • Simple installation without the need for costly special tools • Exchange of threaded inserts without tool damage Installation 3. Screw in the MO with simple tools; either manually, semi-automatically or fully automatic. All Ensat driving tools and machines can also be used for Mubux-MO. Installing under pre-tension increases the breakaway torque. Important: The parts must be free of oil and grease prior to installation. precote 80 coating precote 80 is a microcapsule acrylicbased pre-coating. When screwed into a nut thread, the capsules break open and the plastic flux begins to harden. This creates a firm, water-tight joint. Hand-tight after approx. 20 minutes, full loading capability after 24 hours. precote 80 coating is also available in different kind of colours. Other coating variants for screw lokking and thread sealing are described in more detail in our publication no. 60. 17