Routing ControlLogix to PLC5 via Ethernet, DH+ and ControlNet TECHNOLOGIES Description of KEPServerEX device ID 192.168.111.116,1,[1,2,8,1],2.A.3 OPCClientApplicationAB CLXPLC5CCLXB0123CLXA0123ControlLogix (A)Slot 0 = Logix 5550Slot 1 = 1756-DHRI0Channel B = Node 11Slot 2 = 1756-CNBChannel A = Node 4Slot 3 = 1756-ENBTIP = 192.168.125.116Logix 5550 to Logix 5550 to PLC5 via Ethernet, DH+ and ControlNet ControlLogix (B)Slot 0 = Logix 5550Slot 1 = 1756-DHRI0Channel A = Node 8Slot 2 = 1756-CNBChannel A = Node 13 Slot 3 = 1756-ENBTIP = 192.188.185.117PLC5 (C)ControlNetChannel A = Node 3CLXB0123EthernetDH+ControlNetEthernetDH+ControlNet 192.168.111.116 = 1756-ENBT module of Device A ,1 = Port # of the 1756-ENBT module where you gain access to the Back plane of the ControlLogix PLC (see port reference key) ,[1 = Onto Slot 1 of the 1756-DHRIO module of Device A ,2 = Out of Port 2 of the 1756-DHRIO module in Device A where Channel A = Port 2 (see port reference key) ,8 = Into Node 8 of Device B ,1] = Port # of the 1756-DHRIO module where you gain access to the Back plane (see port reference key) ,2 = Onto Slot 2 of Device B (1756-CNB module) .A = Out of Channel A 1756-CNB module in Device B .3 = Into Node 3 of Target Device (see Target Device description) INTERFACE MODULE PORT 1 PORT 2 PORT 3 1756-ENBT Back plane Ethernet Network N/A 1756-DHRIO Back plane DH+ Network on Channel A DH+ Network on Channel B 1756-CNB Back plane ControlNet Network N/A SoftLogix EtherNet/IP Messaging Virtual Back plane Ethernet Network N/A