KEOL-UV range 278
3Pages

• QUICK POLYMERIZATION • EXTREMELY FLEXIBLE PRODUCT • HIGH TEMPERATURE HOLD KEOL-UV RANGE 278 has been specially developed for bonding materials plastic. Its great flexibility allows it to compensate for the differential expansion forces between the assembled parts. It is a photosensitive acrylic base translucent resin. Single component and of intermediate viscosity, its application is very simple on all types of support. Very good bonding results on PMMA, ABS, SURLYN, etc ...

SURFACE PREPARATION The strength and durability of joints depend on proper pretreatment of the surfaces to be bonded. At a minimum, the bonded surfaces should be cleaned with a good degreaser to remove all traces of dust, dirt, oil or grease. The pretreatment of thermoplastic materials such as PVC, polycarbonate, polypropylene, PMMA, etc., can be made using a light blend of ethers or isopropanol. Strong solvents are not recommended as they may damage plastic surfaces. For any other surface, petroleum or any other solvent. When possible, perform mechanical abrasion to remove paint from...

PRECAUTIONS FOR HANDLING THE PRODUCT KEOL-UV products are generally safe to handle, provided the precautions regarding handling chemicals are taken. The product in cartridges must not come into contact with food products or kitchen utensils, and certain safety measures should be taken to prevent the contents of the cartridges from escaping and does not come into contact with the skin, as people with very sensitive skin could be affected. It is recommended to use rubber or plastic gloves, as well as eye protection. The skin should be thoroughly cleansed at the end of each work session by...